Sorry to hijack your thread but what is that throttle body off it has less polution crap on it than mine

Thanks K-DOGG when can I come get it

WTD 1200 ute tow bar in Perth please
Cheers
Brad

I got my ute licenced at midland it went straight over the only thing that he was really worried about was the demister fan he couldnt work out how to turn it on and he didnt say any thing about the disk brakes or Mags .have you seen the red 1200 its in Perth he wants 5700 for it the car is advertised on this site somewere

cheers, I will pull it out tomorrow now that my engine stand is free the manifold is off its going the the welders on tuesday to get modded to fit my ute you can check it out if you want before I drop it off

Im chasing a 120y manual g/box tailshaft in perth if anyone has one I need it because I just bought a 1000 2 door and some one has put a different diff housing in it (flange is the same size as h165) and used the 1000 tailshaft by grinding the diff flange nut down and elongating the bolt holes out its not very pretty

WTD datsun 1000 2 door sedan rear seat in Perth


Cheers Brad

i just picked up a centre out of bluebird for $50 from pick a part (H165) it fitted straight in its a 3.7 ratio im sure there was another bluebird there if you only want the centre

I just went through this with my ute 120y are different i bought a 1200 sedan for 100 bucks and spent the day with a drill and drilled the spot welds along the chassis rails and up the sides of the fire wall and removed the whole front end i didnt take pics of it in half but have some good b4 and after shots if you end up doing this its a long and sh1tty job. thinking back probebly should of did up the $100 sedan

it looks like a datsun box its got the cable clutch