hi im after a sunny smoothcase gearbox 4speed or just the bell housing end.... internals not important any help appreciated if you have one let me know where and how much thanks.
MORIDAT

hi
a sunny smooth case gearbox was used in late model sunny,s.....the bellhousig is smooth it does not have raised ribs on it, most are 4 speeds sorry i don,t have a picture.
hope this explains it.
MORIDAT

hi are either of the gearbox,s smooth case and if so how much. thanks
MORIDAT

hi
bought a1400 to rebuild it had spun no2 bearing when i took it to be reground it was bent 5 degrees so ineed an A1400 crank can any body help please thanks
MORIDAT

whats a msd excuse my ignorance

g,day
my 1200 is very hard to start when cold , it turns over about 20+ times with the choke on before it fires, after it reaches operating temp it starts with first turn of the key it idles at 750rpm , rev,s fine timing is set at 6 degrees by timing light new plugs points and leeds i have tryed 2 carbs still the same problem float level is 1mm just below the dot on the sight glass i am thinking electrical maybe something is not operating properly until hot....HELP.

have solved half the problem.... connecter from back of car, tank, tail lights etc was not pushed right in BUT the termp gauge still does not work

hi
has any one have any ideas why the temp and fuel gauges won,t work on a 1200 coupe i have put in a new temp sender every thing else works fine .
also i have a gregorys 1200 workshop manual, which wiring diagram is the correct one to use,the B110 does not have a tacho , the NORTH AMERICAN one has tacho but also has a warning buzzer of some kind very confusing any ideas on problem much appreciated thanks

when i put parking lights on, first position on light switch headlights come on it should only be the parkers . if i flick the dipper switch to high beam it just leaves the parkers on. this is on a1200 coupe. has any body had this problem or know how to solve it, wiring conections are all correct according to wiring diagram in gregoreys workshop manual. i have also tried other light switches and dipper switches problem still persits. HELP ME PLEASE.

CAN ANY ONE TELL ME IF 1200 AND SUNNY DIFF CENTERS ARE INTERCHANGABLE ALSO ANY TIPS ON DO IT YOURSELF TURBOCHARGING A 1200

THANKS MORIDAT