Probably an oil cooler if it has two hose on the top of it.

I used mobile auto hoses up in Redcliffe. They made up braided brake and clutch hoses and a new steel line that runs from the master cylinder to the back of the cab for the rear hoses.

Solid lifters are used to replace hydraulic lifters, main reason for a CA is that they allow for higher lift cams to be used.

Aquadip.com.au I haven't used them, was one of the first sites on google...

D x 2 Datsun
MacDat x 1 Nissan
Oda70 x 1 Nissan - one side only
float_6969 (nico forums mod) x 1 Nissan
leadpaw (nico) x 1 Nissan
Cable_Tie x 1 Datsun
___1200ute x 1 no logo

I would think you need to sit in them and see if they are comfortable for yourself.

Has pricing been worked out yet? I might be keen on one with no word.

Hi, does anyone have a photo of the ute tyre inflation sticker/placard similar to this? http://datsun1200.com/uploads/photos/13442.jpg
Dimensions would also be helpful so I can print one about the correct size and stick it in the car.

Good stuff. Mine was the same, it managed the start running on two injectors. You would be surprised how hard you can hit the injectors to help get them moving again. I still had to get my injectors cleaned to get it to run properly.

Are you sure the injectors are ok and not gummed up from sitting? I had Kev come round the first time I started my CA and he checked the injectors by supplying power and earth at the injectors and again through the harness to see if they were clicking.

As suggested, Kev will have ideas on what to check and will probably walk you through what to do.