I just redid the rear pair of hoses in PVC coated braid with stainless fitting for about $180, they are fairly long though due to my rear end setup. Took the guy about 20 mins to make from my template/sample.
I had it all originally done a few years ago so I can't remember what I spent for the fronts and the hard line to the back.
The hand break lines just needed modifying and were done in a couple of days.

I had my brake lines done by mobile auto hoses in Clontarf and my hand brake cables by control connections in Sandgate.

I would think a slight stretch. Closest size on tyrestretch.com is a 265/30/19 on an 11" rim.

Hi oda70, what coils are you runnning with the W&M pro 14?

I have a Ross balancer as well, I order the MJ race as i came as a single pulley.

CA_1200_project, did you order the metal jacket or MJ race?

I think ross balancers (MJ race) is the only one, could be wrong though.

Depending on how far you want to go have a look at this link - http://www.driftopia.com/2007/11/14/c ... ber-2-from-10-lines-to-1/

Hi,

As above, I'm chasing a CA18 block with sump and crank for mocking up other parts. I don't need the head, manifolds, pistons or rods. I would prefer that the crank still has bearings even if they are worn. I'm happy for it to be in parts but would like a enough of the bolts / caps etc to put it back together and be able to spin the crank.

I don't want to pay much and want to be able to pick up in Brisbane in a few weeks time. Please PM or reply if you have items you want to sell.

Cheers
Nathan

I'm making brackets which will mount the rear lines to the top 4 link bars. My top links are triangulated though so it directs them to a splitter in the centre of the car. I have a few pics of them here - http://www.nissansilvia.com/forums/in ... hp?showtopic=476588&st=90

Nissan, taarks.com, frsport.com