thought u bought some 12'' rims???
i still need some so let me know if ya find some extra sets....
i got a guy that can deliver some from sydney i have to ring in the morning to see if he has some 15s aswell so he could prob bring u a set of stockies i can ask 4 u if u want

drum brake struts-complete springs,shocks etc...

lower control arms

speedo cable

retractable seat belts with buckles

2x 14'' alloys rubber bad

2x17'' chrome wheels 5 spoke looks good

120y brake master cylinder

new in box rear drum slave cylinder

wirring loom complete un cut

blinker stalk

small civic radiator small leak

ill add more parts soon when i see what else is there

pm me or post on here what you want

pick up from wollongong or i can post for standard postage costs at your expense

thank you

laney
lucky you they must be all different
my guards were 20mm-30mm longer on 1 side
bout same little less on the other
nothing lined up in my experiance with these panels
i had so much probs with a bonnet for a honda i went through 3 before i bought a 2nd hand 1 from wrecker that lined up perfect cause it had flip up lights i wasnt happy how the tai 1s sat 20mm up off the lights and rubbed on lights
most beaters i know say same thing there a nightmare to work with

need the rubbers for doors with the chrome strip on outside to seal the window also need the little rubbers on the inside in same location
any ideas???

also the chrome stip that goes across the bonnet???

thanks

i have a 4 speed manual and i want to do some highway cruising for a while.....it will rev to high like it already is
id put 3.9s when i take to drags but want to do some cruising for now but i spose anything will do for now cause my diff is noisy as and want to get the stronger setup in

all 6 sets are on 25 spline carriers but been told i can use the gears on a 28 spline carrier

purchase it when you come over for the holiday...
the taiwan panels are so bad its funny

i lent on my guard working on engine and i have a huge dint
didnt take much do #### it up
i was spewing all i did was pull something out of engine bay and i heard a pop and looked and had a huge ass dint
they are rubbish but spose these days you have no choise appert from repairing the originals

im not worried bout the gears cause i have 6 sets of gears and the 3.9 is to high for me to use
i need to know if the carrier will bolt up to ford or holden housing
i would use your carrier breaks llines etc
with my crown wheel and pinion gear and axles that are alredy shortened

found a place that can do it today
but depends how much metal is in location they want to drill
dont like my chances but worth a visit to see if its possible

did r31 skyline come with 28 spline
and the rest of the r31s come with 25 spline?

and any idea if the carrier and pinnion gear would fit a ford or holden bg housing???

i have 1 on my car and it turbo not that it matters on idle and when u take off but i think its fine in traffic
BUT
in the wet and on the grass i find it nearly impossible to take off without spinning the wheels
even sometimes in the dry if u give it to much when taking off traction is impossible in 1st