located in Perth
diff centre H165 4.875 ex Vanette $400

best 5 speed?

column shift vanette wont fit
GX 5 speed is NON overdrive so it wont drag your revs down
63 box, good luck finding one!

that leaves the std shift or dogleg shift 60 boxes---both OK but I prefer std shift

I have a friend chasing an A15 in Perth.
I can help out with A14 but not the 15
really only chasing a short motor as he has heads and manifolds.

The arms are the same idea as alternator arms but they are
" L " shaped and use a bigger bolt than an alternator.
Short of fabricating from scratch, you could use the alternator arm as a start and multiple washers to achieve the correct offset
and keep the arms parallel to the mounting holes

Tom
The compressor is fitted and adjusted the same way as an alternator
2x bottom holes are pivots, 2x short slotted "arms" connect the top holes of the bracket to the top holes of the compressor.

before fabricating the arms, dummy fit your compressor to your block to ensure your double pulley is compatible with the bracket/compressor .

Bolt the compressor to the bracket at the 2 bottom holes and check the alignment of the compressor pulley and the double groove pulley on the crank. Do this with a straight -edge.

4.6 diff is SOLD

John-- will call you tonight

Gearbox engages all gears and turns nicely by hand but I have not road tested it.
4.6 H165 is still available

bump

$400 for the H165 4.6 plus $25 shipping to Brisbane
BUT
it might be sold -- just waiting to hear back from another member

$850 for the box
$45 shipping to depot in Kidman Park SA ( can deliver to your door/ work/ mechanic etc)