I hope the bobtails can be shipped to NZ - exactly what I am after for my coupe

Bump - I have one set left, and thats it, won't be getting anymore

Generally from what I understand.

Although I sold a set to an old guy over here in NZ, who has not got real low suspension, but gets a lot of "bump steer" when he drives on the open road, he has dialed in some more castor, and wants to fit these spacers, to hopefully get the front end to behave itself a bit more at open road speeds.

not a very good photo but you get the idea

Attach file:

---

  bump assy small.JPG (29.85 KB)

BUMP STEER SPACERS / ROLL CENTRE ADJUSTERS

Improve handling over uneven surfaces due to changes in suspension geometry / height of spindle, shock etc.
Keep the Geometry correct so your lower control arms arent above the horizontal!
These also look flash as too!

Details:
75mm Bolt centres (Suit all 1200's and 120Y's)
25mm thick
6061 Grade Aluminium construction
CNC Machined (and I had them red Anodized as well)
Included (12.9) high grade ZP cap screws with washers and nuts

Nice Quality, bolt straight in (although I had one strut bottom with a slightly daggy weld, that I had to give a quick lick with the dye grinder)

Datsun Nissan 1200 120Y B110 B210

2 sets available - PM me or email me first in first served.

AU$150 delivered

Attach file:

---

  bumps small.JPG (21.11 KB)

Bit of an update.
car panel work has been taken back to bare metal again... and a new primer applied all round.
Will be undersealing underneath this week, with a view to start fitting out suspension and components underneath next weekend, and taking down off the rottisierie. Hope to have home in my garage soon after, to start pre-fitout of engine, and complete the new wiring, ECU & fuel system requirements.

Attach file:

---

  DSCF2676.JPG (19.85 KB)


  DSCF2677.JPG (16.79 KB)


  DSCF2682.JPG (24.70 KB)

Bit of an update;
Panel repairs completed at last!
Interior is painted, exterior and underneath is being done tomorrow.

Attach file:

---

  aug1.JPG (26.76 KB)


  aug2.JPG (28.34 KB)


  aug3.JPG (26.55 KB)


  aug4.JPG (22.82 KB)


  aug5.JPG (27.16 KB)


  aug6.JPG (23.29 KB)


  aug7.JPG (27.89 KB)

Can you put prices up or PM me price for the following:

Nismo Head Gasket
Double valve springs
Collars
Valve Spring seats


Thanks
Kitch

Do you know if sedan seat rails are the same?

As I have a set on my spare seats

4AGE 43mm Silvertop ITB's come up on Trademe in NZ now and again, I paid I think NZ$120 for my first (clean, tidy) set, with manifold, injectors, TPS, linkages, inlet plenum, FPR, vaccum lines etc etc. My second donor set I paid $50 for just the throttle bodies, TPS and linkages.

so yeah in NZ anywhere from $40 to $150 - pretty good buying