Thanks DD,
I didn't realise the buckets were different left to right, so good to know.
Great that B210 and B310 are the same, should definitely make one a bit easier to track down.
I am surprised that 610 (180B) are the same though, as I thought being a twin headlight car they would be 5 3/4" rather than 7".

So I am still slowly working away at getting the Coupe back on the road, and I am still chasing a few bit and pieces:

- Left hand headlight mounting bucket/bracket and adjusting hardware (only need 1 as I have 1 already)
- Right hand front lower combination light (parker/indicator)
- Washer nozzle from centre of bonnet
- Washer bag with motor
- Interior light
- Hazard Switch to suit steering column surround
- Centre console (prefer Coupe type, but will consider ute/sedan style)
- Cigarette Lighter
- Original Radio (doesn't need to work)
- Heater box (don't need a core or fan, my current box is smashed)
- Interior door pull handles
- Door lock pull pins
- Seat belts to suit Coupe (going to use as template to get a new set made, so really just need to borrow)

Let me know if you have any of the above.

Cheers,
Mat.

The Coupe is getting closer to completion so its time to find an engineer to get the VASS certification done.
Who has anyone based in Melbourne (VIC Australia) used.
I have contacted quite a few but most aren't interested or are too busy.
Cheers,
Mat.

Anyone got a pair of 14s in 6.5 to 7.5 inches wide.
Don't need to be anything special as I am setting up the rear of my coupe so just need something to put tyres on at this point.
But if you are hanging onto some Starsharks let me know as I still need a couple more.

Attach file:

---

  20200721_122334.jpg (187.70 KB)

Another quick pic of mocking up the rear ride height

Attach file:

---

  20200721_122334.jpg (187.70 KB)

So I ended up going for 165/55/14 tyres.
They are a much better fit and overall diameter fits in the front wheel well much better.

Attach file:

---

  20200721_122510.jpg (197.55 KB)


  20200721_122448.jpg (179.94 KB)

I am chasing a pair of 14" Starsharks somewhere in the 6.5 to 7.5 width range.
They dont need to be perfect as I am restoring them anyway.
Let me know what you have.
Cheers,
Mat

I am struggling to find a decent tyre to fit my 14x6.5 rims.
What is everyone else running, as the standard 185 60 14 isnt what I want as the rolling diameter is too big.