Looking for a passenger side window for a mates dato 1200 ute 78 model. Any help would be great, contact Brian (08) 93993204 or email bbpauto@bigpond.net.au.

Cheers

When are enough spare parts enough?
http://home.iprimus.com.au/gmrhodes/bpp/bpp.htm

Can you provide contact details and what suburb are you in.
Thanks

Hi looking for an auto, flex plate, pedals, shifter, also front discs and calipers. Any ideas on a price.
Cheers
Glen (Perth)

He Datski620, on other side near Lewis Rd.

Hey Ben351 there is a guy in Armadale that supplys us Morry owners with a lot of our Datsun parts, give him a call, details are: Brian 93993204

I'm in Forrestfield, not a Datsun owner but Datsun powered (and supercharged).

Have just put a sc14 on an A15 in my Morris Minor and found that the main problem was too much boost. I did have a 135mm pulley on the crankshaft which was putting out 11psi, now I am down to to 115mm pulley which seems better but still have to retard the timming as it was still pinging at full accetoration. May try a smaller pulley in the near future, I hear 4-6 pounds boost is about best.

Anyone had luck in getting a weber 32/36 to work right (without any lag or flat spots). I just can't seem to get the carby set right on my 1500. I have tried a few combinations of jets and visited lots of threads but nobody has posted a YES IT WORKS & HERE ARE THE JETS YOU NEED thread. The best combo I have yet is, fuel 140-140, air 145-145, emuls F50-F50 and idle 50-50. Any help would be great.

Have sent PM

Bump