|
Re: B210/120Y badges |
|
Not too shy to talk
Joined: 2009/2/27 3:46
From Perth WA
Group:
Registered Users
|
Just cleaning up these badges to go on the coupe.
Attach file: 20180212_172534.jpg (138.29 KB)
Posted on: 2018/2/12 10:14
|
|
|
Re: B210/120Y Dedicated thread |
|
Not too shy to talk
Joined: 2009/2/27 3:46
From Perth WA
Group:
Registered Users
|
These are the markings on these wheels
Posted on: 2018/2/12 10:08
|
|
|
Re: Rear brakes 120y |
|
Not too shy to talk
Joined: 2009/2/27 3:46
From Perth WA
Group:
Registered Users
|
The problem was I put the shoes in back to front!
Posted on: 2018/1/13 2:58
|
|
|
Re: B210/120Y Dedicated thread |
|
Not too shy to talk
Joined: 2009/2/27 3:46
From Perth WA
Group:
Registered Users
|
Finally on the road after a number of years. Had to get the gearbox reconditioned and a list of suspension bushes, seatbelt and a couple other minor things to pass the pit check.
Also it was cheaper to get tyres for these wheels (off a 240z I think) which I had lying around than buying the 12 inch tyres for the ROH wheels. I like these wheels better anyway.
I heard there were only 150 of these two door sedans introduced to Australia. Would be keen to hear if anyone has seen one in Western Australia as I have not seen another!
Attach file: rsd2.jpg (113.95 KB)
Posted on: 2018/1/13 2:41
|
|
|
Re: B210/120Y Dedicated thread |
|
Not too shy to talk
Joined: 2009/2/27 3:46
From Perth WA
Group:
Registered Users
|
I haven't posted for quite a while and saw some mentions on these wheels. They have ROH caps on them, that's about all I know.
Attach file: 07122011.jpg (175.06 KB)
Posted on: 2018/1/13 2:16
|
|
|
Rear brakes 120y |
|
Not too shy to talk
Joined: 2009/2/27 3:46
From Perth WA
Group:
Registered Users
|
Hi guys Quick question rear wheel cylinder waa leaking and now fixed but drum very tight and binding in reverse. Have adjusted at top, seems to be three settings and still binding. Does the brake fluid cause the shoes to swell?
Posted on: 2017/9/13 12:20
|
|
|
Re: ignition problems |
|
Not too shy to talk
Joined: 2009/2/27 3:46
From Perth WA
Group:
Registered Users
|
Cheers for the help stumack, ended up being the points, had a mechanic mate tell me to disconnect dist. wire from coil, earth coil out while checking for spark out of a spark plug lead. There was a faint weak spark, so I thought it couldnt be points or distributor, as it seemed to be out of the equation. Anyway, replaced points and started up straight away!
Posted on: 2012/10/19 0:23
|
|
|
Re: ignition problems |
|
Not too shy to talk
Joined: 2009/2/27 3:46
From Perth WA
Group:
Registered Users
|
bump and help please!
Posted on: 2012/10/3 13:41
|
|
|
Re: ignition problems |
|
Not too shy to talk
Joined: 2009/2/27 3:46
From Perth WA
Group:
Registered Users
|
okay, got some time to have another go, voltage between small wire at coil and dizzy is 11.3, ignition on, put probe on points and nothing there, have taken condensor off before this, and put a spare in, old condensor had no ohms reading but spare did, and still no spark. Must be something simple but cant nut it out!
Posted on: 2012/10/1 9:58
|
|
|
Re: CA18DE LHD '72 Coupe |
|
Not too shy to talk
Joined: 2009/2/27 3:46
From Perth WA
Group:
Registered Users
|
cool build mate looks good
Posted on: 2012/9/25 9:39
|
|