ROconnor - My main concern is the sedan diff into the ute for now so i can keep it on the road with little downtime but PIGDOG is right, I am planning to put the ute diff into the sedan.

PIGDOG - Thanks for the info mate, I thought i'd see a few question marks over why but I'm planning on putting a more torquey motor in the Sedan and the ute owner is more concerned about a highway friendly ratio. It's certainly fine by me
So it seems there's a fair bit of work involved in doing this. It's obviously not as straight forward as 'Bolt-on' would suggest. For the shock mount, you mentioned getting a coupe bottom plate. Does that mean the ute one is un-useable?

Also, while your here you might know this too; the sedan has an Auto box, so will that driveshaft still be useable how you mentioned or will I need to source a Manual one?

Thanks again

Hi, I'm looking into removing an H165 differential that's in a 1200 ute (I assume it's post '74) and replacing it with an H145 differential out of a '71 1200 Sedan.

I've done a bit of searching and researching and found out a bit, but its hard to get some concise info. My main concerns are fitting the U-bolt pieces and shock mounting plates to the smaller diameter diff housing. I understand the Ute and Sedan shock mounting style is different and Im assuming I'll need to adapt the Ute pieces to the H145 somehow - that's question 1. Maybe I could just use all the 145 diff U-bolt pieces except swap the bottom plate with the Ute one so the shocks still mount correctly? I'm not sure. Some of you guys might have played with this stuff a bit more than me and hopefully someone knows.

The next issue I think I might have will be with the driveshaft and distance between the gearbox (running an A12) and diff changing with the smaller diff. Does anyone know if there is some play in the gearbox/driveshaft join and if there is enough to compensate for a possibly smaller or shorter diff? Or alternatively if someone knows exactly which bits are needed and from which car (eg. driveshaft, shock mounts, brake splitter, handbrake mount etc.) to get the H145 into the Ute and running, that'd be appreciated.

Thanks.

Hey I was wondering if I can get a phone number to ask a few questions and maybe tee up a time to have a look?