hi guys, any1 got any ideas on how to seperate the idler arm off the draglink. without damaging the rubber o-ring/ rubber sleeve.
or can you buy that o-ring/ sleeve.
iv had a bit of a go at it with a puller. but its at a odd angle.. i know ill get it off at work with the a bit of heat and the press. but ill damage the rubber.

hi there, im chassing all the steering arms. so idle arm, track arm, tie rod ends, i think thats all.
there use to be a bloke on ebay that use to sell them. but all i can find on ebay now is idle arm. i want them all brand new. im ready to put motor in, and id rather replace now while motor is out.
if anyone has that blokes details, or any1 has any brand new. etc let me know. thanks.
for this moment thats all. i will need more stuff later in time. car has been sitting there for 2-3 years, not moved. im bound to find many things that will need replacing

EDIt. also if any1 has any flares..

hi guys, im back onto getting my 1200 ute on the road after a couple years. im chasing a a12 or a14 or a15. prefere assembled and running. but if any1 has anything. pm me or txt or ring me 0402 939 622 (adrian).
iv already got a manifold and webbers and cam to suit a a12. but im not to fussed on what i get, just wanna see this ute on the road again.
i prefere victoria, unless someone from interstate is willing to post at my cost.
cheers Adrian

hi guys, im after some oversize valves for datsun A12 intake 40mm exhaust 32mm. will consider 37mm intake.
doesnt matter about new or used, as long as there good and not bent etc.
pm here or email
lushes_31@hotmail.com
cheers