Hi is anyone in Briz selling or got a set of extractors for an a12? the guys @ the shops are quoting $200 for some pace makers but I just spent the money on a set for the EH Oldhen and have neglected the Datto (shame job I know ) so if you have a set sitting in the shed getting dusty let us know. cheers Quote:

cool i will pick em up on thursday then have a go on the sat. thanks for the info and will report any thing that pops up.

have located some top condition stanza struts/ calipers (slight rust on disks) and they are a bargain too!! now i was gonna chop two inch off the coils so as it lowers by one inch (is this correct?) is this a strait fit to my 76 120y? as this is the only car it cannot b of road for more than a day nd a half and i hate getting into a job then just when almost finnished it is out by apoofteenth and on a sunday arvo everythings friggin closed aaagghhh!!! this seems to be straight a forward swap and i know that most of u guys have all done it and are prob over newbees askin the obvious... but is it?

nah i dont meen the old jaguar spoke mags although... nah. ade will b in touch soon whens a good time 4 u (as a uni student my free time is out of check with the working world) cheers

to tell the truth (hear we go) i thought the datsun was a poxy little car... till i met me other half and she had one.. any way started to tune it then fix it once a couple of years... drove around most of Aust in it and the little bugger just kept going n going... now i love them as they are cheep to fix fun to play with and look ####e hot with some mags and a bit of lowering

was just checkin out the subaru stoppers, what subbie are they off?? (am always lookin for a better way to pull up

im finding it hard to locate some hotwires to fit and also look good looked at some this morn that were out in the weather for a couple of years (brizzy rain can strip the lube of a bike chain!!) so anyone in briz with some under cover let me know pleeease.

thanks for the response guys but im in backwards brisbane

im keen for mags, yes i know i don't have a datsun1200 or a ute but i need some mags to fit a120y with stock struts?

ive been finkin bout this too as i was hottin up a mates v8 commondoor with him and the cold air intake was recomended as cheep nd effective, but how to fit it to a 32/36? as the filter plate is not round like a 350 holley, or the stock carb which you could clamp a intake pipe to nd feed it up the front some where. i was finkin of doctoring next to the radiator so it fits between the light nd radiator but behind the grill with a pod of some sort. any thoughts?