Hi there,

I am selling the following NOS parts. I am uploading a few pics but can send pics of anything in particular.


12010-A12040 Nissan Comp Pistons 74mm (8 EA)
12038-A12040 Nissan Comp Piston Ring Set (4 Sets)
Will send two sets of rings with one set of pistons
$200 a set for pistons and rings

12100-H8500 Nissan Comp A12 Rods (15 ea)
$30 ea

12100-H8500 Nissan Comp Rods Lightened/Polished/Shot Peened (1 Set)
$150 Set

13202-H6200 30mm Nissan Comp Exhast Valves (4 ea)
$30 4pcs

44070-27720 Nissan PB110 Rear Brake Shoes (4 Pairs)
$20 pair

13238-H1001 - Nissan A12 Pushrods (8pcs)
$20 Set

13231-78201 - Nissan Oversize Cam followers/Lifters (8 ea)
$50 for 8 pcs

13204-H8500 - Nissan Cam gear (2 ea)
$50 ea

12200-H8560 - Nissan A12 Crankshaft (3 ea)
$250 ea

11041-H1007 - Nissan A12 Round Port Cylinder Head 37mm Intake / 30mm Exhaust G35/H89 Casting

New ARE dry sump pan with two scavenge pick ups (2 ea)
$250 ea

New Tholen Design dry sump pan with single scavenge pick up (2 ea)
$250 ea

Attach file:

---

  Cylinder-Head-02.jpg (175.34 KB)


  ARE-Sump.jpg (93.51 KB)


  Tholen-Sump.jpg (86.54 KB)


  Pistons-and-rods.jpg (177.64 KB)

Hey there,

Looking for A14 or A15 Shortblock in the Seattle area...

If your not close and your willing to ship, let me know..

Many thanks

Asking $600 for each cylinder head and $450 for each crank.

Many thanks

Hear are some pics of the head and cylinder heads I have. The Nissan Competition Department sold these in the late 90's and early 2000's for competing in SCCA's H Production category with the 1200. The G25 casting has a heart shaped combustion chamber with 37mm Intake and 30mm Exhaust valves...

I have two new NOS 1200 heads for sale - OEM part number 11041-H1007 with G25 casting and round ports. These were purchased through the Nissan Competition Department for SCCA racing but are not GX heads.

I also have a pair of NOS 1200 cranks part number 12200-H8500.

Can send pics upon request, shipping from Seattle, USA via post.

Thanks

Many thanks for the info....much appreciated

Can't seem to locate a rollmaster CS9110 anywhere. Let me know if you are interested in selling one.

Many thanks,