dog....

what you need to look for is the H72 on the head.. take the valve cover off ( ok duh ) and look for the markings.. then you can port you new head to match your intake. there is enough room to do the porting, we do it all the time ! if you cant find a head let me know and I must have 6 or 7 of them ..

switzergt5@yahoo.com

john

HEY GUYS.. LOOKING FOR A UN-CUT A13 BLOCK FOR MY RACE CAR... IF IN FLORIDA, I WILL PICK IT UP...

JOHN

have set of weber 40's for sale...$400 fresh rebuilt this year..or will trade for mikumi's 44 or weber
45's thanks john

eddie...

have a pair of weber 40's for sale $425 for the pair.. e-mail me at switzergt5@yahoo.com ...both have been just rebuilt for
last season.. john

ryan ...

sorry it dose not come with the manifold or the likage...but you will get two carbs that will make your little datsun haul ass... twin 40's on my gt5 race car was not
enough power..we are going with weber 45's.. hope this helps...

john

ryan.. have a set of weber 40's that i will let go for $435 for the set..
just rebuilt this year

john

you can call 727-743-5815 or email at jlrswitzer@yahoo.com

i have ordered pistons from nismo.com.. they have flat tops for the a12.. they might have them for the
a14.. good luck
john

have a pair of weber 40 dcoe for sale.. $500 fresh rebuilt all new floats.. you can e-mail
me at switzergt5@yahoo.com

thanks john

The largest piston that I have done is 100 over from datsun comp.. flat tops. they seem to work fine in
my 1200 A12 motor

john

Kenn..

the datsun 1200 or b-110 in naw racing in scca the two classes are gt-5 and itc.. i race in a group of 6 people that have all 1200.. we race from sebring to
daytona and atlanta..

hope this helps.. john