No. The manual tachs where drivin off of the front cover.

Could it be that the h190 leaf spring mounts are 15mm further apart than the h145? So the leaf pack isnt compressing or rebounding straight up and down as intended?.

Im running an a14 with sss 510 su carbs, I like it alot. Great motor, only bad thing about them (if your selling it) is the price.
Around here ( northwest usa) an a14 is cheap, couple hundred bucks, 3 maybe 5 for a verry good example, the su carbs are 100-300$ used, a series su manifold are scarce, but around. 100$ can usualy get one.
No one saying your motor isnt good, great combo, but its not a "race motor" such as a gx, wich got closed chamber big port heads, 4 into 2 exaust manifolds, su carbs are just another thing they got. Not the only thing.

(Caps lock engaged) WHERES THE PICTURES! not that it matters. You could post pictures of the carbs, should be 3 bolt filter flange triangle pattern. If it was an a14t. Probably just sus on a stock 1.4, whats the head casting? Whats the exaust manifold look like?

Ive put 8600 miles on my 1200 in the last (exactly) one year.
Just got done puttin an a14 and su carbs, 63a dogleg, and h150 (diff, not housing, I retained the h145 axles and housing, and brakes)

[IMG]http://i879.photobucket.com/albums/ab352/therealredbanner/20140722_192842_zps25a803db.jpg[/IMG]
http://nwdatsuns.com/viewtopic.php?f=10&t=157

Well I ended up getting my "6206-32rs" bearings pull em out and and they are the nsk bearings # b323cc5 I was searching for to begin with.

Wow man, that is stellar. Verry helfull thank you. I will see about getting this added to the wiki.

Im finding, that bearings are hard to find here aswell, and the wiki, wich shows an axle diameter of 30mm,is incorrect, at least for my usa market coupes, 71 and 73.
My axle diameter/bearing id shows 32mm. Outer diameter 62mm, and thickness of 16mm
Im hoping that I ordered a bearing that will work (6206-32rs) most the bearings that list as a replacement would be considered a 6206 wich has a inner diameter of 30mm, are the usdm coupe/sedan axles 2mm bigger than other markets?

Thank you, m76 adeed to my search list. Does your sheet show the profiles by any chance? Z therepay could make me a set if I had them. Wouod alao be interested in the m66 profile.

A14t carbs are differnt than other 38mm hitachi carbs, easy way to tell if its an a14t, or an a14 with gx carbs. But there was never an a14gx motor. Altho there was b210gx's, they did not have a14gx motors. Still better than no motor at all.
But it looks like those are 1200gx carbs. On a regular a14