has anyone got this to work? I have all the bits off a Hyundai and started shaving the manifold but wanted to check to see if this has been successful.
I would be interested in an alloy round port a14 head with water inlets and gx alloy flange and 2 steel exhaust ..what would shipping be to usa 96013 zip code and the cost of the flanges david
I am in west of USA, California ... I would like to know what R1850 means .. cost in us dollars via paypal?? will these fit a left hand drive 1200/b110 clearance issue with master cylinder??
well i have been doing some searching and I am going to convert to EFI and have found several companies that have an efi system where the ecu is less than 800 and then ad the parts to make it work. injectors sensors etc...also there is mega and micro squirt systems and they require some extra work but are under 500 go luck
I picked up a 73 1200 coupe last week for 100 usd .. saw it ran last year .. was the neighbors .. he or someone with less than averege brain pan over heated the motor to the point of no return....total drag..any way have been reading a bit but would like direct help in sorting out this job. I need to replace or rebuild...would it be better to replace with an A14 or stay stock and rebuild or replace with a stock size motor ... Idon't want a "Project" ... ie modifications to put in a motor that was never intended to be under the hood. thanks david
i am in the same boat .. I want to up grade so I would like to know what you guys are using that won't interfere with the sheet metal and need a brake upgrade.
I am redoing a 73 1200 coupe and need some parts .. do you still have a few .. passenger wing window to start .. need an engine .. any sugestions on a repalcement .. looking at the a14...want an easy replacement. thanks david