|
Re: WTB- a15 crank |
|
Home away from home
Joined: 2011/11/1 8:53
From Leeton NSW
Group:
Registered Users
|
Bumpp need one
Posted on: 2016/4/15 11:45
|
_________________
Get in, sit down, shut up and hang on!!!
|
|
WTB- a15 crank |
|
Home away from home
Joined: 2011/11/1 8:53
From Leeton NSW
Group:
Registered Users
|
Chasing an a15 crank in working order a standard one would be awesome.. let me know what you have :)
Posted on: 2016/3/28 21:18
|
_________________
Get in, sit down, shut up and hang on!!!
|
|
Re: best place to get oversize a14 pistons? |
|
Home away from home
Joined: 2011/11/1 8:53
From Leeton NSW
Group:
Registered Users
|
I found a company that sells pistons to suit a mini minor motor still a series motor not going to go to extreme probably only +030 bigger.. im not very mechanically minded just going off what the huy building my motor is telling me hahha thanks
Posted on: 2016/3/17 0:07
|
_________________
Get in, sit down, shut up and hang on!!!
|
|
best place to get oversize a14 pistons? |
|
Home away from home
Joined: 2011/11/1 8:53
From Leeton NSW
Group:
Registered Users
|
Hey there chasing some oversized pistons for an a14 anyome know of any forsale or point me in the right direction to someone who sells them?
Posted on: 2016/3/7 12:31
|
_________________
Get in, sit down, shut up and hang on!!!
|
|
datsun 1200 ute wheel fitment. |
|
Home away from home
Joined: 2011/11/1 8:53
From Leeton NSW
Group:
Registered Users
|
Hey guys have been given the opportunity to purchase some old school jap wheels the fronts are 13x7 -1 and rears 13x7.5 -7 what are the chances of these fitting rear will fit front will be poking im thinking? Im on stock brakes and 2 inch blocks in the rear?
Posted on: 2016/1/19 5:22
|
_________________
Get in, sit down, shut up and hang on!!!
|
|
Re: Flat tops for an a14... |
|
Home away from home
Joined: 2011/11/1 8:53
From Leeton NSW
Group:
Registered Users
|
ok then will check it out any companies in Australia that specialise in them do you know?
Posted on: 2016/1/12 4:46
|
_________________
Get in, sit down, shut up and hang on!!!
|
|
Flat tops for an a14... |
|
Home away from home
Joined: 2011/11/1 8:53
From Leeton NSW
Group:
Registered Users
|
Hey guys building an a14 want it to make over 100hp atw planning on running twin dellortos definitely staying NA having a hard time chasing up pistons was told to go flat tops to raise compression so thats what im chasing anyone know some places that specializes in a series performance parts ? Cheers
Posted on: 2016/1/11 14:36
|
_________________
Get in, sit down, shut up and hang on!!!
|
|
A14 BLOCK WITH A15 INTERNALS? |
|
Home away from home
Joined: 2011/11/1 8:53
From Leeton NSW
Group:
Registered Users
|
Hey guys so i have and a14 block and im wanting to put a15 internals have a basic idea of what i need to do just wondering if anyone has done it and can provide me some feedback? So the plan is to put an a15 crank with forged pistons.. so to fit the a15 crank my a14 block will need to be notched? Will need to use a15 rods and pistons.. what else is needed ? Or should i save the time effort and $$ and just leave it an a14? Cheers
Posted on: 2015/10/8 22:40
|
_________________
Get in, sit down, shut up and hang on!!!
|
|
Re: WTB- A15 CRANK |
|
Home away from home
Joined: 2011/11/1 8:53
From Leeton NSW
Group:
Registered Users
|
Just out of curiosity whats a good price for an a15 crank that will need to be cleaned up or been sitting around for a while?
Posted on: 2015/9/29 1:20
|
_________________
Get in, sit down, shut up and hang on!!!
|
|
Re: WTB- A15 CRANK |
|
Home away from home
Joined: 2011/11/1 8:53
From Leeton NSW
Group:
Registered Users
|
I don't know much about them tbh so an a15 crank will have to do the job hahaQuote:
Posted on: 2015/9/23 9:02
|
_________________
Get in, sit down, shut up and hang on!!!
|