I'm looking for a ducktail wing and a front lip spoiler in the US for my 1975 B210 GX. Let me know what you have, tanks.

Thanks for the help guys, so the wheels I like are 16x8 +20 offset and the bolt patterns is a 4x114.3. I want to lower my car as much as I can but from what I'm understanding these wont fit my car, is this true and if it is what is the maximum size of the wheel that can be used with a lowered car?

So I finally got my B210 running it turns out the timing was wrong and my carburetor was malfunctioning, replaced it with another one I had and the car started up right away. So now I want to buy some wheels I was thinking of some 16x8 and the offset is +20mm but I want to know if these will fit my car. Is anybody using this size, any suggestions will be helpful?

Any help will be greatly appreciated.

I live in Salinas CA, and as for the firing order I searched here and all I could find was a picture of distributor with the firing order but as for the firing order on the head I don't know if it starts from the fire wall to the radiator or the other way around, I also checked the spark and it seems to be fine. The thing is that when I put gas down the carburetor and I crank it the cars wants to start but as soon as it finishes that fuel it stops. Checked the fuel pump as well and it seems to work properly, don't know what else to check.

I swapped a A14 motor to my 1975 Datsun B210 but it doesn't want to start, I don't know if its the firing order from the distributor or the firing order from the block that I'm getting wrong. Also there is a little window on the carburetor and I heard that it supposed to be filled of gas to the half ways mark but it is not, I tried many things but still no luck. It's my first carburetor car so please pardon my ignorance, any suggestions will help.
Thanks,