Thanks guys, It turns out the shaft was bent... got a new dizzy in now and it works sweet

Yes I had this happen too. So it wasn't just you.

I discovered my engine was running on 3 cylinders because there is no spark getting to #3

So.. I popped the top of the dizzy to have a look at the points. It seems that the points are not opening for one of the cylinders. The problem is that when I adjust the points to open for this lobe.... the points then don't close on the opposite lobe. I have spent ages trying to make an adjustment with no luck.... am I on the right track here?

btw I'm using a new set of points.

I'm looking for some 2nd hand extractors in melbounre. To fit to a15/sedan if that makes any difference.

I have one in Melbourne. Just pulled it out as im going to manual.

thanks guys. can any one confirm does the pedal just drop down? or does it bend to the left?

I might see if I can find something at picka using the spacer out of the auto pedal box to get the top right.

yeah I tried that.. the 120y pedal is totally wrong bends in the opposite direction :(

soz '70 sedan

Wanted clutch pedal for manual conversion
(cable too)

In Melbourne