ok guys here it is!
need cash now for a new work truck!
$4000ono the lot

just wanna know what you guys would pay for it all, then decide if it's worth selling i guess!

its a real toss up cause i really wanna do the conversion,i just dont have time now cause of the business. and i sold my ute :(

hey guys!
the story is,
had to sell my 1200 ute, which all this gear was going in, now i dont know if im gonna get another 1200 or not!
ive just opened my own business and dont have the time, i really want to keep it all but in the back of my mind i know that ill never do it so i thought id let you guys throw a few offers at me and maybe id bite.
i dont have a set price cause the package is priceless to me. it is just about everything you will need.

also i forgot to put in, there is a brand new EFI Hardware surgetank, bosch efi pump and peirburg feed pump to go with the package too.

some one care to explain what the dealer comment means???

hey there mate! yeah i have gearbox x-member too! but sorry not wiling to seperate!

this is almoast a everything you could possibly need to complete a ca18det into datsun 1200
there are plenty of things i have forgot, any questions or parts please email
i am located in melbourne.

CA18DET
NEW DURA GLIDE ACL RING SET
NEW DURA GLIDE ACL MAIN BEARING SET
NEW DURA GLIDE ACL BIG END BEARING SET
NEW NITRATED CRANK WITH DRILLED AND SCREWED JOURNAL PLUGS
REBUILT AND TANKED HEAD ALSO CRACK TESTED
NEW HEADSTUDS AND WASHERS
TANKED AND HONED BLOCK
FULLY BALANCED BOTTOM END FROM CRANK, RODS, PISTONS, FLYWHEEL AND HARMONIC BALANCER
NEW DAIKIN EXCEDY "TUFF" CLUTCH KIT INCLUDES THRUST RACE
MACHINED FLYWHEEL
ULTRA SONIC CLEANED INJECTORS WITH ALL NEW SEALS AND BASKETS
TANKED INLET MANIFOLD AND T/B
REBIULT STARTER MOTOR
EVERY SEAL AND GASKET REPLACED WITH NEW
NEW CAMBELT
NEW IDLER AND TENSIONERS
OIL PUMP REPLACED AND PACKED
NEW WATERPUMP
MANUAL DET COMPUTER AND LOOM WITH IGN MODULE AND AFM
ADAPTOR PLATE AND TRUST AIRMAX POD FILTER
TURBOSMART ELECTRONIC BOOST CONTROLLER
BLITZ BLOW OFF VALVE
5 SPEED MANUAL DET GEARBOX
ENGINE IS FULLY ASSEMBLED

1200 BITS
MADDAT STYLE 1200 CA18DET ENGINE CROSSMEMBER
TOYOTA TA22 NEW HYD CLUTCH MASTER CYLINDER FOR 1200 CONVERSION
NISSAN SILVIA S13 TRANSMISSION TUNNEL TO WELD IN
NEW HYD CLUTCH SLAVE CYLINDER
CA18DET SILVIA RADIATOR
NEW INTERCOOLER 600X300 CORE SIZE
CUSTOM SHORTENED AND BALANCED TAILSHAFT
1200 UTE DIFF WITH NEW PEDDERS SHOCKERS
120Y LARGER SWAY BAR
STANZA FRONT END, CASTOR RODS, CONTROL ARMS, ALL WITH NEW POLYURETHANE BUSHES
STANZA STRUTS WITH NEW PEDDERS SHOCKS
240K 253MM NEW DISC ROTORS ON REPACKED HUBS
REBUILT 240K TWIN PISTON CALIPERS, WITH SEAL KIT AND NEW PISTONS
COMPLETE FRONT AND REAR SUSPENSION BUSH SET, POLYURETHANE, PRETTY MUCH EVERY BIT OF RUBBER UNDER THE CAR NEW
ALL NEW TIEROD ENDS INNER AND OUTER PLUS NEW BALLJOINTS
SET OF 4 ET TURBO ALLOY WHEELS AND 4 STOCK DATSUN RIMS WITH GOOD TYRES
THERE IS MANY MORE SMALL THINGS I HAVENT MENTIONED
EASILY OVER $7000 SPENT
THIS IS BASCIALLY EVERYTHING YOU NEED FOR THE ENTIRE CONVERSION.
EMAIL FOR PICS

also for sale spare det computer and loom
spare ign module