thanks!

just out of curiousity what yr does it says??

also, it looks like i was missing a condensor as i didn't see one on the old harness.
so if i got this right, a ignition wire goes to the + side of the coil then a wire goes from there to the black white terminal. Then a wire goes from the blue wire terminal to the - side of the coil.
what is throwing me off is the ground on the+ side of the coil. and that condensor is between the ground and the positive side right??

Hello?? anyone has a bigger pic of that??

here is afew pics of it,








don't worry i ain't finished with the wring yet!

Sorry folks i am not us to this setup! see the othe distributor thread i posted! lol

thanks!

sorry about that, i am not us to this setup on a forum site! lol

Yes that is it! from the look of the pic you posted it looks just like it! and the numbers on the block is right by the distributor, the numbers are 600643, i pretty much memorized it cause it has been bugging me for the last few days.

you believe that nissan dealer couldn't tell me what the motor is by part numbers off the motor, they said i needed a VIN # which is a problem for me! lol

i see a wiring diagram on that pic, but it is too small for me to make out, how can i blow that pic up so i can see it??

Thanks, for your help!! THis is really driving me crazy! lol

yes that is it!! and the number is on a flat surface by the distributor!

the pic you posted is pretty small but from what i can see it looks just like it, square module looks almost like a volkswagen dist.

I am working on a frankenstien jeep pretty much, and it has a nissan motor in it. from looking at pics it looks like a A14 or A15 type motor.
Now my questions are, How can i better identify this motor? the only number i found are by the distributor which is, 600643. Also on the distributor i have this ignition module, that has 2 terminal on the top they create the L shape.
the module is almost a perfect square, what does this distributor need?? a ground or a positive wire?? and which terminal do i use??


Also if it helps I got this number off the top of the bell housing, 4D 8Z10080. Thanks!!