Will get some

Thanks bige, ill have a look at that when we re-assemble.

Thats true, but the cam was still pushing the push rod against a siezed rocker.

We did finaly change it back to black, just looks better.

We found where the noise was coming form. A siezed rocker. We dont want to open the engine, but would this rocker have made a mark or ridge on the cam. ADVISE PLEASE !!!!!!!!!!

Almost 2 years and R30000 later, shes done.
This site was a great help to us.

Attach file:

---

  01.jpg (98.71 KB)


  03.jpg (120.55 KB)


  04.jpg (112.56 KB)


  05.jpg (108.08 KB)


  06.jpg (88.19 KB)


  07.jpg (98.17 KB)


  08.jpg (111.89 KB)


  09.jpg (121.29 KB)


  10.jpg (120.18 KB)


  11.jpg (113.20 KB)


  12.jpg (92.81 KB)


  13.jpg (78.28 KB)


  14.jpg (89.29 KB)


  15.jpg (81.90 KB)


  16.jpg (88.72 KB)


  17.jpg (95.63 KB)


  18.jpg (59.15 KB)


  19.jpg (57.34 KB)

Ive attached pics of the head, block and Head bolts. everything seems to line up correctly.

Attach file:

---

  Andre Head.jpg (86.29 KB)


  N 6110 N(001).jpg (101.59 KB)


  N 6110 N(003).jpg (113.89 KB)

I have checked the head bolts and the long one is at the oiler hole. Could this oiler hole maybe be blocked and if so how do I clear it, We have been driving the ute for 3 months with that noise, its getting worse not better.

We are having a problem with a A14 motor. There is no oil getting to the head and valve train. We have replaced the oil pump already, but still nothing. Some advise PLEASE !!!!!!!!!! We are running a hot A12 head on the engine, but I dont think this is the problem. We did reinstall the origanal A14 head, but still no oil getting up top.