Browsing this Thread:
1 Anonymous Users
|
|
Which new (or good used) dizz should I buy? |
|
Just can't stay away  
Joined:
2011/9/24 3:28
From SoCal
Group:
Registered Users
|
Folks,
I am interested in replacing the dizz in my A15. It is a early 80s electronic unit with the matchbox module on the side. I would like to continue to use an electronic dizz but type is not a problem, I will change the wiring to it as required. Also would be interested in a compatible coil. Interested in what the forum thinks would be the preferred options.
The advance cure should be adjustable or perhaps already recurved.
Engine specs:
A15 short block
H89 head port matched to a GX intake, with GX valve springs
Dual HIF4 SU carbs
Pretty much stock compression (USA market H95-style dished pistons)
Cam: Delta regrind, 262D, .425 lift at valve
5 speed trans
It's in an MG Midget (Austin Healey Sprite). 3.7 rear end, about 1600 lbs (725kg)
Posted on: 2017/3/19 23:33
|
|
_________________
1969 MG Midget, A15/60A
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
