TITLE: Twin Webers for Sale JETTED FOR HEAVILY WORKED A12, will work on moderately worked.

Moderate meaning;

Cam, compression, electronic ignition, oval port head, dual springs etc etc

ITEM:

A) 40DCOE Weber Carburetor x 2
B) Ported Manifold GX Bolt Pattern(angular type consistent with port roof of H75 & H89 & GX)
C) Ram tubes (chopped down)
D) Linkages (most parts)
E) Softmounts (good with rubber cups and washers)

CONDITION:

A) Excellent freshly rebuilt, zero time on rebuild. Not a scent of petrol in them. Comprehensive rebuild kit, all seals replaced, all gaskets replaced, bearings inspected greased and refitted. New float valve, new fuel filters, new float shaft, new washer seals....list goes on.
B) Good condition, GX bolt Pattern, angled inlet gives better flow. Also shorter than most twin manifolds.
C) Yeah these are ok but they've been cut down pretty roughly, I have no idea why. They will still bring some benefit to the engine.
D) I have a heap of linkages here just trying to make one out of a a few, at the moment, most of the linkage is here.
E) Good condition.

REASON FOR SELLING:

Don't need these, A12 is gone, now onto bike carbs.

PRICE AND PRICE CONDITIONS:

Looking for $1000.00, shipping would be $35.00.

Offers welcome, will consider splitting manifold from carbs.

EXTRA INFO:

These are the best set of weber carbs I've had, the last set was pretty good too but these really take the cake, very well kept with no broken or busted threads.

There are a couple of screws missing but they will be here before the items sell.

Jetting info will be added shortly.

Previous carb sales here:

Webers, Bike Carbs etc etc

Twin 40's

Twin 45's

LOCATION:

Adda-raide, South OZ.

CONTACT:

Email great! PM okay.

PICTURES:

Attach file:

---

  Webers + Manifold + Softmounts + Trumpets.jpg (160.46 KB)


  Webers + Manifold + Softmounts + Trumpets 2.jpg (140.58 KB)


  Webers + Manifold + Softmounts + Trumpets 3.jpg (170.27 KB)


  Weber DCOE Close 1.jpg (165.31 KB)


  Weber DCOE Close 2.jpg (173.63 KB)


  Weber DCOE Close 3.jpg (145.50 KB)


  Weber DCOE Close 4.jpg (135.62 KB)


  Weber 1.jpg (147.68 KB)


  Weber 1B.jpg (169.21 KB)


  Weber 2.jpg (139.44 KB)


  Weber 2B.jpg (138.33 KB)

These carbs would also suit Mild A14 and A15. Manifold bolt pattern is to suit GX bolt pattern so you'd need to install 2 centre studs, refer manifold pics.

Chokes
4 x 30mm
Emulsion Tubes
4 x F11
Main Jets (at bottom of the Emulsion tube)
4 x 115
Pilot Jets
4 x 45F9

Usually sexy things come in pairs, these are no exception.

Thanks for that D, they came up pretty good.

Willing to split the carbs from the manifold, or the manifold from the carbs, depending what you are after.

Open to offers guys.

damn those carbys are tempting ! ,pm sent !

Jesse, replied to your PM.

Sounds like Jesse is after the carbs only, so anyone for the manifold and linkages?

From what Ive seen available these are a very good price.
The local weber carb builders here want 380 aud for a rebuild
plus parts. Jesse has made a great choice they are good as new.

Rebuilds at the carb specialist here go for $220 for a basic build and $350 for comprehensive. That is for each carb.

Make an offer people, need cash ASAP so very negotiable if you can get cash to me quick.

Chris

bump

Would really like to sell the lot to a Datsun member, they are currently up for sale on peebay.

Offers please.