hi all,

with a multimeter and regulated DC supply,
i tested that thing out

so, there is 3 way switch,
"off", "standard", "electronic"

2 LED,

and 4 wire,
black (i assume is gound),
green wire (with male connector)
blue and yellow (with female connector)



so i assume black is ground (-ve)
and assume green is +12v

i hoook them up and turn to 'electronic' on the 3 way switch, the LED for "ign on" lid,

but tested, both blue and yellow no voltage.


than i switch to 'standard' on the switch,
blue wire show 12v ,
LED is off,

swtich to off, blue and yellow lead also no electric...


strange...
just not make sense..