Hi Guys, I am after the following parts that I could obtain for an aspiring Race/Rally Team in the Sydney Aus area using 1200 sedan as the platform. We are on a very limited budget, so the parts could be purchased, swapped for other parts I have, or donated/lent with the donor/lender able to have some seat time in khanacrosses...alot of fun and laughs!!! and also a link on my racing site www.onlinemotorsport.com.

Parts for 1200 sedan are:-
4 5 or 6 point harness (2-3" width belts)
high back race seat
sports steering wheel and boss kit (any cond)
left and right front guards (DONE Thanks FLYBY)
used 13" rally tyres or 14" wheels and rally tyres
brake master cylinder
front disk brake setup (1200 strut)
Mig or Tig welder
bonnet clips
high flow fuel pump.
hydraulic handbrake for rally setup
car trailer suit 1200.
or anything else you might think we can have .......
Your consideration would be much appreciated.

Cheers...Convertedwww.onlinemotorsport.com

I have a set of front guards, from memory a slight bit of rust down the bottom, nothing major though.

Put a couple of DatNet stickers on the car and you can have 'em

Thanks Flyby - we'll give you premo sponsor status! PM me with pick up details - appreciate it,
Ian.

Thanks flyby thats much appreciated I have also added you to my site with a link.
www.onlinemotorsport.com

No worries, glad to help you guys out.

I will return the link tongiht!

Oh, BTW. I am in the shop first thing so I will leave the panels there for pickup. I will put them in the workshop, grab them if you can see them otherwise I will let the office know someone is coming to get them.

Cool thanks flyby!!! Make sure you leave the stickers as well....

will do

Any other parts guys?