"I'm interested?

Where do we source the thrust bearing to suit?"

??? PM sssute he would know.

The price will come down with ammount ordered. Need no's ATM, will know how long they'll take when know no's, doesn't have to be 100% right no's just rough!

Designed for S13 but will fit 1200

i have a set of s13 camber plates that im going to use on my wagon.
They have the same bolt pattern but fit the oposite way on the 1200. some s13 plates cant get more then about -1.5 degrees when on a 1200 but thats all you really need.
if you want more just machine the slots out more. whammey.

"i have a set of s13 camber plates that im going to use on my wagon.
They have the same bolt pattern but fit the oposite way on the 1200. some s13 plates cant get more then about -1.5 degrees when on a 1200 but thats all you really need.
if you want more just machine the slots out more. whammey."

Cheers for the comfirmation.

yea hwith the s13 ones they arent designed to be adjusted the way the 1200 ones need to be...but it looks like there is a fair bit of adjustment both ways on them though

edit: here are some s13 ones, notice the lack of upwards adjustment

there we go. awsome explaining pigdog. easy and affordable, sorted

Was andos not also busy making one's and making them available at a small price to us here on the website? What happened to that chapter. I got the designs from him but did'nt get to making them yet. Anyone have them made and installed?

1200GXman More info please.

Another option is getting some from D2 in Perth they work out to around $240 posted.

might want to do turbo manifolds these are pretty easy to get premade. ;)

Well, go to andos's profile and look at his photo album.I think you will find pictures of the one's he made and wanted to sell.
He was also willing to do a group selling to people who are interested.
The email I received from him says at the bottom he is a suspention engineer, so I think he knows what he is doing. The test pair he made he was apparently using for more than a year now.
Because I am in South Africa, and could'nt let him make me a pair because it will cost me too much to get here and all, I asked for the .dxf files and detailed explanation.
He was friendly enough to provide it to me on one condition I don't distribute without his knowledge. I would suggest you email or PM him to find out more. They look good enough to make and use. I have'nt gotten to it yet though to make my own and install.

Maybe you could point me in the right direction, I had a look at all his photos and there wasn't anything about camber plates?