Where to begin..

We'll firstly there where many who told me that they would like to do the machinery theirselves.

No, I have no meaning to collect any money from anyone before the modelling stage is completed.

The casting company want's somenone physical person to be their contact and take the response of actions if needed. They are not going to start something like this with some guy that goes with the name WillyWheezler12345 on some forum on the internet.

Thats why I want to be in contact with real people with real name,address and phone number before I invest a half a years salary for something crazy like this.

Is there someone who can't use roller rockers in their race cars for some reason?

The finalising of a head is not so much of work if you have the right tools, so I would not be worried about that.

We can use the group buy for all the other parts, but one thing at a time. The rockersystem needs to be investigated before we make any orders with the head. Thats why I and most likely many of you too want the cad pictures with measurements of the rockers and manifoldplates. Thats all we need to make this head work. Not including the pistons etc.

The manifold plates can be done by my friend but the shipping would most likely cost many times more than the plate itself so it would be cost effective for all of us to get them made locally I think.

Those who send me their contact information will be contacted under the next week with some further questions about all the options and then we will know the real costs of all included.

I had no idea that about that in Aus there is not so many engine work shops. Here we have usually one in a village that's population is over 300..

But again those who want in send me email.

do you have a rough price for these in aussie $'s

The pricing reads in the topic, and a lot of information that it's good to know also.

STD lenght valves can be used. so can the inlet/exhaust valvesprings and other small parts to go with that.

Those who want to order the head will contact me under this week with your name,address, phone number etc. to mail address ltr(at)dnainternet.net topic 11041-M0820 Head order.

This is for confirmation of intrest. After sending me your contact info I will send you mine and the extra info concerning this subject.

The price enquiry gets old the sixth of july 6.7.2007 so the order should be placed before that.

And seven has confirmed this far.

cool, sorry. my mistake, i did actually think LTR was asking us to pay some money

email sent mate

This is the current status of this list:

If your status should be listed as OK, please correct it and make sure you have send me mail

01. Status OK: D/man [AUS]

02. B120Dat [AUS]

03. Status OK: Dattoman_1000 (possibly 2 units) [AUS]

04. Lemonhead [AUS]

05. Status OK: Ianey (plus uncle?) [AUS]

06. Ratdat_UK [UK]
07. kue1000

08. Status OK: LTR [FIN]
09. Status OK: 100A X-1[FIN]
10. Status OK: Erpe [FIN]

11. Hobbyhead 2pcs. [FIN]
12. Curtis [AUS]
13. kakimotoz (possibly 2 if 40 people) [USA]

14. Status OK: 1200rallycar (definate 1, possibly
2) [AUS]

15. Littledarkone [AUS]
16. Tablista
17. 2332owner [USA, OKINAWA]
18. Dattodude [AUS]
19. Benny [AUS]
20. MLS [AUS]
21. Proxdatsun [FIN]
22. Sundat1200 (2 units) [USA]
23. Leosnake [USA]

24. Status OK: Wombat Racing [OZ, TASMANIA]

25. Teretonga [NZ]
26. Pepper [AUS]
27. possum1200 aka blake [AUS]
28. Prospec [AUS]

29. Status OK: datsmokin (definitely 1, possibly 2) [AUS]
30. Status OK: Mikan [FIN]
31. Status OK: b10bum [AUS]
32. Status OK: Rally1200 (1 possibly 2 if you get the 40 orders) but depending on rocker setup.?
33. Status OK: Mako [FIN]

LTR, can you puy your email address in your profile please.

I have sent you a PM.

I'm still interested in getting one.

PM sent

im more likely to just get the one now

Will the inlet ports be raised slightly from stock?

Also this head will be awesome for boost with flat tops if the chamber size doenst become an issue.

Looking at the pics of the pistons




Theres plently of room for a longer rod and shorter compression pin height

It's up to the head guru to decide what we need to do to the ports.

But propably yes, when you think of it.

LEMONHEAD, I've sent you mail yesterday.