|
|
Browsing this Thread:
1 Anonymous Users
|
|
Mild cam prices, Perth |
|
No life (a.k.a. DattoMaster)  
Joined:
2008/1/20 11:52
From Perth WA AUS
Group:
Registered Users
|
Hi guys, I am looking at getting my A14 cam ground, and would like some input on prices, specs & who to go to for a good job.
The car will not be a daily driver, some street driving, some track but mostly garaged.
Motor: A14
Carbs: Twin 40mm Solex (side)
Exhaust: (Not done yet) probably extractors & 1 3/4 pipe.
Thanks, Levey.
Posted on: 2008/8/10 12:52
|
|
_________________
Datsun 1200 2Dr sedan.
|
|
|
Re: Mild cam prices, Perth |
|
No life (a.k.a. DattoMaster) 
Joined:
2008/2/17 3:04
From Melbourne, Oz
Group:
Registered Users
|
CROWcams in melbourn quoted me $140 late last year edit: and are well known, and good at what they do CROWCAMS.com.au
Posted on: 2008/8/10 15:02
|
|
_________________
"I hav achieved wood"
"choice from chris, drive harder than your mum... word."
|
|
|
Re: Mild cam prices, Perth |
|
No life (a.k.a. DattoMaster) Joined:
2008/1/20 11:52
From Perth WA AUS
Group:
Registered Users
|
Thanks man, all input is appreciated.
Posted on: 2008/8/11 12:54
|
|
_________________
Datsun 1200 2Dr sedan.
|
|
|
Re: Mild cam prices, Perth |
|
Just can't stay away  
Joined:
2007/4/23 11:58
From W.A.
Group:
Registered Users
|
camshaft engineering company osborne park
9444 7022
cam grind $125 each follower $4.70
those prices were a year ago.
cam grind code 2500
inlet 30 70 duration 280
outlet 65 31 duration 276
lift 295''
very happy with this grind, engine pulls hard from 3000 through to 7500 a bit of a pig to drive in traffic though. doesn't idle the best either. plus these guys have been around for donkeys years, speak to ross, very helpfull
Posted on: 2008/8/11 14:24
|
|
|
|
|
Re: Mild cam prices, Perth |
|
No life (a.k.a. DattoMaster) Joined:
2008/1/20 11:52
From Perth WA AUS
Group:
Registered Users
|
Thanks for that info, I'll check it out.
Posted on: 2008/8/12 13:03
|
|
_________________
Datsun 1200 2Dr sedan.
|
|
|
Re: Mild cam prices, Perth |
|
Just can't stay away Joined:
2007/4/23 11:58
From W.A.
Group:
Registered Users
|
just a thought. the engine builder said that finding the valve springs was a bit tricky because of the lift height. if you were to get an engine built he might be the man to see. my a14 cost 2500 to build. i am very happy with but now thinking how to get more power.
It would be awsome to see another a14 singing at barbagello or jacks hill, hurry up and get it built you will not be sorry.
Posted on: 2008/8/12 13:42
|
|
|
|
|
Re: Mild cam prices, Perth |
|
No life (a.k.a. DattoMaster) 
Joined:
2003/2/10 5:17
From Freo
Group:
Registered Users
|
i can supply the double springs, both GX speck, and race to 10k rpm.. :)
Posted on: 2008/8/12 14:38
|
|
_________________
'68 Thou Wagon,(home now) up and running
'69 2 door project, the yellow thing,
A12A Project motor, for the yellow thing.
A15 PSI Project Motor
'72 CB750k,
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
Transfer
