oh yea cool,, well if you have that original pipe the bends will lead to that pipe at the back.. you just gota see it there it`s probably not even that important.. actualy i wonder if that`s where that smoke is comming from.. that or some oil got on the exhuast

oh mine is twin hitachi side draft carbs.. but i think it should be the same thing

you have the 140 y gx?

Hi slayer_toy

No it is B210 GX Sedan (1974 Model)

Thanks
Regards
Sumith

oh i see.. we didnt have that model here .. cause the y`s have the back and and that slant by the headlights, but i see yours has a straight bumper.. owell you come right with that pipe?

Here is that funny little valve I was on about. PCV Valve (Positive Crankcase Ventilation).






The little pipe you are talking about should be connected to the rocker cover pipe as shown:






Sumith you have a GX version but does it have a GX engine like this one?






From what I recall (and from how you described it) you have a standard A12 engine.

EDIT: Yeah your engine is stock:






Is that what you wanted to know??

I seriously recommend you purchase one of these (120y manual):


Information & Answers


And I seriously, SERIOUSLY reccomend you visit the 1200 encyclopedia, conveniently updated by our very own ddgonzal (on a daily basis)!!

All of those pictures I uploaded were all from the encyclopedia, please have a read:


http://wiki.datsun1200.com/index.php/Datsun_1200_encyclopedia

Sumith has a regular A12 engine in a B210 GX car. It is a single carb engine.


Sumith's Engine

A12 GX engine only came in B110 GX car. B210 GX came with either with A12S or A12T engine.

Hi ddgonzal


Actualy the present carburetor is not the original one came with the car , we have replaced it , is it possible to fix a single carb to a car which comes with duel carb ?

Thanks
Reagrds
Sumith

Hi ddgonzal

so what would be my engine , i don't have any cast no on the rocker cover or id plate

But i know 1 thing , my neighbor has a 1200 sunny GL, my car is very powerful than his one

Look at this Link those are my cylinder heads

http://datsun1200.com/modules/myalbum/photo.php?lid=19240


Thanks
Reagrds
Sumith