No worries Dan, will be round later today. Hopefully collecting the block then aswell....

You going to Gawler SM?

id be keen on a pair of the cowl vents

Submitting the order now. Will cover the bill myself and then comeback to you guys once they're done. The side vents will take some time because I have to do a fair bit to them.

Also looking into professional polishing today (hopefully).

Datsun 1000
lethal_john - 1 x cowl vent
clyons8- 1 x cowl vent
elemental_funk- 1 x cowl vent
cable_tie- 1 x cowl vent

Datsun 1200
Gylezy - 2 x Sets cowl vents, 1 x set air outlet vent
go1200 - 1 x set cowl vents
tongy - 2 x sets cowl vents, 1 x set air outlet vents
thekane125 - 1 x set cowl vents, 1 x set air outlet vents
clyons8- 1 x set cowl vents
outrun- 1 x set cowl vents, 1 x set air outlet vents
dantheman0433- 1 x set cowl vents, 1 x set air outlet vents.
CA_1200_Project- 1 x set cowl vents, 1 x set air outlet vents.
DatsAndy- 2 x set cowl vents
Cable_tie- 1 x set cowl vents
frankthedolphintrainer- 1 x set cowl vents

Keen for a set of cowl vents please.
Cheers

there pretty, do they mount up flush with the cowl?

They sit about 0.35mm shy of flush.

Not sure anyone can pick 0.35mm by eye at that distance anyhow, so yes they're practically flush with the cowl panel.

The metal polishers were closed today, the numbers are pretty good so I will look into full polishing and see if that can be somehow incorporated into the price for as little extra as possible.

Taking into account the good numbers the price will be dropped, the amended price will be released once I get some prices on how cheap we can get all of the parts (as a group) polished at the specialist.

Datsun 1000
lethal_john - 1 x cowl vent
clyons8- 1 x cowl vent
elemental_funk- 1 x cowl vent
cable_tie- 1 x cowl vent

Datsun 1200
Gylezy - 2 x Sets cowl vents, 1 x set air outlet vent
go1200 - 1 x set cowl vents
tongy - 2 x sets cowl vents, 1 x set air outlet vents
thekane125 - 1 x set cowl vents, 1 x set air outlet vents
clyons8- 1 x set cowl vents
outrun- 1 x set cowl vents, 1 x set air outlet vents
dantheman0433- 1 x set cowl vents, 1 x set air outlet vents.
CA_1200_Project- 1 x set cowl vents, 1 x set air outlet vents.
DatsAndy- 2 x set cowl vents
Cable_tie- 1 x set cowl vents
frankthedolphintrainer- 1 x set cowl vents
mattblack- 1 x set cowl vents.

Sorry for the late notice... Im in for a set of 1200 cowl vents. Thanks

Hello Everyone, sorry for the delays. Order has been submitted, fabrication will begin tomorrow.


Final pricing is as follows;

1 Datsun 1000 Cowl Vent: $75.00

1 set of Datsun 1200 Cowl Vents: $67.00

1 set of Datsun 1200 Outlet Vents: $50.00

POLISHING of Datsun 1200 Cowl Vents: Additional $20.00 per set.

POLISHING of Datsun 1200 Outlet Vents: Additional $10.00 per set.

Polishing is done by a company here locally (not me) and is done manually as opposed to using a tumbler or polishing bath. Personally I would suggest you polish them yourself.

1000 cowl vents will be delayed slightly (I ran out of money).

Postage:

$10.50 3kg pre-paid satchel.

Unfortunately the vents are too heavy for the 500g pre-paid satchels.

I am willing to send as bundles to each state- you sort out distribution.

Important Information!

The air outlet vents have changed design, they aren’t as water proof as the first type but they are better looking, if anyone has a problem with this and would like to resort to the old design please say so now and I will try to include a run of the old designs:







Also have a special batch of side vents being made up. Hoping these will sell, they are a lot pricier because they’re far more complex but very neat and suitable.

I will begin sending out PMs with payment details and requests for postal addresses, final list below

Cheers.

Chris


Datsun 1000
lethal_john - 1 x cowl vent
clyons8- 1 x cowl vent
elemental_funk- 1 x cowl vent
cable_tie- 1 x cowl vent

Datsun 1200
Gylezy - 2 x Sets cowl vents, 1 x set air outlet vent
go1200 - 1 x set cowl vents
tongy - 2 x sets cowl vents, 1 x set air outlet vents
thekane125 - 1 x set cowl vents, 1 x set air outlet vents
clyons8- 1 x set cowl vents
outrun- 1 x set cowl vents, 1 x set air outlet vents
dantheman0433- 1 x set cowl vents, 1 x set air outlet vents.
CA_1200_Project- 1 x set cowl vents, 1 x set air outlet vents.
DatsAndy- 2 x set cowl vents
Cable_tie- 1 x set cowl vents
frankthedolphintrainer- 1 x set cowl vents
mattblack- 1 x set cowl vents.
DJF280- 1 x set cowl vents

Attach file:

---

  Side Vents.jpg (113.96 KB)

All PM's have been sent out.

I have managed to find some screws that are stainless steel and very close to the original design, they were very hard to get and are specifically made to suit the classic automotive restoration industry. I have included these in the PM's you can buy them or find your own, but be warned they may be difficult to find.

looks good
how are we looking for time chris?
i guess it happens when everyone fronts up with the cash ?
bummp boys
im keen for my set :)
cheers
Dan