Hi all,

As the title, can anyone recommend a reputable place to get a turbo manifold made in Brisbane? (Preferably North-side)
Just after a simple log style manifold to sit the turbo roughly under the intake manifold. Plenty of similar ones have been made up on the site (unfortunately the one thing I havent learnt is how to weld) only difference is I need mine to fit a CT12 flange instead of the usual T2/25, etc.


Cheers,
Sam

Hi mate

will@quickspool.com.au

He's a top guy & did the manifold on OKE020:

http://www.youtube.com/watch?v=Szk2siJHJ7o

Speak to Will at quickspool. He makes proper manifolds for $999 but I'm sure that he would make you up a log style one much cheaper if that's what you want.

He shares a workshop with Scott (Cleveland Exhaust) and between them they can do prettymuch anything you need as far as mods go.

Tell him I (Shifty with the 120Y) sent you.

My manifold has just been finished. Pics for your interest. Obviously hasn't been blasted or painted yet in these pics, this was just as it was finished.

Something as complex as this will set you back around $1k, but obviously will be half that if you just want a ghetto log-style manifold - less materials involve and less labour.

Mate that looks fantastic.
Haha yeah mine will be a lot more ghetto than a tuned length jobby.
I'll have to give them a call :)

These are on the go and almost complete if you're interested in supporting a fellow Datsun enthusiast(or A-Series seeing as you have a Morrie ) , perhaps ready in a couple of weeks (around about).

A-Series Manifolds