User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad



Browsing this Thread:   1 Anonymous Users



(1) 2 »


oval port intake gasket part # for A15?
No life (a.k.a. DattoMaster)
Joined:
2010/6/2 13:35
From Toowoomba & New Jersey USA
Group:
Registered Users
Posts: 2340
Offline
can anyone tell me the part # for an oval port intake manifold gasket to fit between my A15 and my Weber 32/36 carby? Need the one that covers the little water holes on the manifold. Would be much appreciated as the local auto stores reckon they can't get one for me?

Posted on: 2011/1/14 4:33
_________________
---1976 B120 "THE GENERAL REE"--- Former build
---1980 B120 Vanilla Ice --- current build
Transfer the post to other applications Transfer


Re: oval port intake gasket part # for A15?
Home away from home
Joined:
2006/4/26 11:36
From New Zealand
Group:
Registered Users
Posts: 216
Offline
get some gasket paper and trace one out??

Posted on: 2011/1/14 5:08
Transfer the post to other applications Transfer


Re: oval port intake gasket part # for A15?
No life (a.k.a. DattoMaster)
Joined:
2007/1/22 23:06
From East New Britain, Papua New Guinea
Group:
Registered Users
Posts: 6980
Offline
Repco and Autopro normally have them? Otherwise you may need to sift through the wiki pages to find the part #.

Posted on: 2011/1/14 5:31
Transfer the post to other applications Transfer


Re: oval port intake gasket part # for A15?
No life (a.k.a. DattoMaster)
Joined:
2010/6/2 13:35
From Toowoomba & New Jersey USA
Group:
Registered Users
Posts: 2340
Offline
If I am not mistaken the tech wiki only shows gaskets for the original 1200 manifolds. I am taking the original one off and replacing it with an oval port one that came attached to the second hand 32/26 Weber carb I bought. Guess the problem is I have no idea what make and model the new manifold is. Forgive my n00bness but what is gasket paper?

Autobarn, Repco, Supercheap, Burson's all told me they don't have one even for the original intake manifold.

Posted on: 2011/1/14 7:38
_________________
---1976 B120 "THE GENERAL REE"--- Former build
---1980 B120 Vanilla Ice --- current build
Transfer the post to other applications Transfer


Re: oval port intake gasket part # for A15?
Home away from home
Joined:
2008/12/4 1:04
From Sydney, Australia
Group:
Registered Users
Posts: 648
Offline
Use any oval port gasket to suit, and drill out the water holes, tap a thread and screw in stainless grub screws with glue on them. Thats what i did anyway..

Posted on: 2011/1/14 7:44
_________________
B110 sedan
Transfer the post to other applications Transfer


Re: oval port intake gasket part # for A15?
Home away from home
Joined:
2006/4/26 11:36
From New Zealand
Group:
Registered Users
Posts: 216
Offline
now that i've read your post properly (i thought your were after gasket between carb and manifold) supercheap stocks oval port inlet manifold gaskets, i got one last week. If they stock them in NZ surely they'll have them over there, being an australian store??

Posted on: 2011/1/14 8:23
Transfer the post to other applications Transfer


Re: oval port intake gasket part # for A15?
Guest_
um supercheap was a new zealand store im pretty sure that came into the aus market, put alot of small time local sotres out of operation.

i know its hard as hell to find auto 1 in melbourne nowdays.

use some high temp rtv silicon. Im trying it after exhaust shop and mechainc recomend it over exhaust cement.

it was a toss up between loctite maxx copper or permatec untra copper. they both go to 371 deg c so shoudl so for exhaust manifold. Inlet should be ok with the same. i think one says not suitable with petrol, but im lpg so who cares.

Posted on: 2011/1/14 8:43
Transfer the post to other applications Transfer


Re: oval port intake gasket part # for A15?
Home away from home
Joined:
2006/4/26 11:36
From New Zealand
Group:
Registered Users
Posts: 216
Offline
I've got an ACL gasket part number jc214 for oval port a15 inlet manifold

Posted on: 2011/1/15 2:25
Transfer the post to other applications Transfer


Re: oval port intake gasket part # for A15?
No life (a.k.a. DattoMaster)
Joined:
2005/3/22 5:49
From gold coast QLD.
Group:
Registered Users
Posts: 1674
Offline
Geez Jeff you slacker,hav'nt you fitted that unit i sold you yet!Go see Terry at Cheapa Auto Parts in Ashmore and ask him for an oval port manifold gasket to suit an A15 Sunny wagon or A15 Vanette,check in his book of pictures that it is the enclosed type around the bottom of the gasket,should be around $20.00.
If he does'nt have one in stock ask how long and if thats still two long come and see me and i will sell you one of mine for what i paid $20.00 for memory.
Cheers
Rob

Posted on: 2011/1/15 4:46
Transfer the post to other applications Transfer


Re: oval port intake gasket part # for A15?
No life (a.k.a. DattoMaster)
Joined:
2010/6/2 13:35
From Toowoomba & New Jersey USA
Group:
Registered Users
Posts: 2340
Offline
...I am slacking indeed! Think you sold me that unit Rob over four months ago. Finally found the gasket! Cheapa Auto Spares @ Oxenford had it. It is indeed part number jc214 as stated before. Spent today installing the intake and carby with the new gasket. Had a bit of trouble trying to get the throttle cable assembled to the Weber but we put some random bits from around my garage together to get the cable tight. Started first try! Sounds awesome and the engine runs alot better. It idles a bit high but with a little tuning its going to drive like a champ!

Posted on: 2011/1/17 11:02
_________________
---1976 B120 "THE GENERAL REE"--- Former build
---1980 B120 Vanilla Ice --- current build
Transfer the post to other applications Transfer



(1) 2 »



You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.

[Advanced Search]