|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#17232
Re: PERTH BOYS.. GO THE DATTO
estyre
Posted on: 2011/5/30 3:32
Highpressure air and carby cleaner ,remove the line from the car (easy) and spray carby cleaner down the line then using a piece of hose join the line to a tyre inflater with the end unscrewed ,then pressurise and stand back for a minute ,the crap should come out the other end, if not repeat from the other end and so on till its cleared out
#17233
Re: PERTH BOYS.. GO THE DATTO
120013b
Posted on: 2011/5/30 5:36
Hey mate,
Yeah I've got some I'll post up later. Utes at the panel beater's now getting new rear quarters put on. Cheers Mick
#17234
Re: PERTH BOYS.. GO THE DATTO
120013b
Posted on: 2011/5/30 5:45
Hi,
Anyone know a wrecker I can sell (for cheap as chips) my A12 engine, was running perfect before taken out, and gearbox? Also have dash, immac seats, seat belts, radiator etc etc..
#17235
Re: PERTH BOYS.. GO THE DATTO
perthute
Posted on: 2011/5/30 5:56
hey mick bailz might be keen on ya seats , if the rad is in good nick and the dash i might be keen :D a12 n 4 speed might sell for 100-300 bucks
#17236
Re: PERTH BOYS.. GO THE DATTO
120013b
Posted on: 2011/5/30 6:36
Unfortunatley the dash is in pretty average condition, cracks etc. Also have heater core
#17237
Re: PERTH BOYS.. GO THE DATTO
120013b
Posted on: 2011/5/30 6:36
Radiator is in immaculate condition
#17238
Re: PERTH BOYS.. GO THE DATTO
Posted on: 2011/5/30 13:22
if you dont have a compressor, nige blows real hard, and if you give him a tickle, he sucks too.
#17240
Re: PERTH BOYS.. GO THE DATTO
up2mischief
Posted on: 2011/5/30 15:06
KULH, im gonna see if my ute fuel line is the same, changed carbys tonight, idles like a dream. Im happy with the fuel can next to me, even with a durry hangin out of my mouth! Got a bit of wiring to do by the looks but hopefully done soon. Taking the boat out tomorrow so there goes a day of progress, but wakeboarding is easier than working on datsuns. Jordy, the coupe will hopefully be ready by the next 1 and got the missus keen to hav a steer as well, told her bout flippa n his missus. So keep me posted for the next 1. Jesse, worst bit i wana replace is rh side of boot, from boot seal to just below boot line, about 5 inches each side of the corner. Upload pics when i get a chance. Should get a quick coat of roadworthy paint on wednesday!
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|