imagining how it will appear on my fenders.

Attach file:

---

  284879_10150251223596787_698051786_7848817_2368548_n.jpg (43.67 KB)

we started pulling down the suspensions, axle, and all under chassis parts to the determine which ones need new replacements. Parts that were in good condition was sent for sandblasting and powder coating, while rubber bushings, shock absorbers, and tie rods will be replaced with new ones. I did not have much problem in getting mechanical parts.

Attach file:

---

  375505_10150378083804648_257325374647_8118262_266863401_n.jpg (56.05 KB)


  382952_10150377973584648_257325374647_8117777_311163397_n.jpg (116.06 KB)

i also took some time to visit our nissan dealer to check out on parts availability. Also took had quick looks with the b120 parts catalogue.

One truck is still being used by the Nissan dealership as its utility vehicle. It was parked beside a younger sunny pickup the ADresort.

Attach file:

---

  281868_10150281342029648_257325374647_7513653_509932_n.jpg (59.20 KB)


  301992_10150423437919648_257325374647_8286197_382930715_n.jpg (54.67 KB)


  379971_10150423435789648_257325374647_8286187_1335468686_n.jpg (57.23 KB)


  166921_10150423448924648_257325374647_8286234_272848784_n.jpg (56.24 KB)

Left is B110-style, and right is B210-style

Quote:

thanks,i didn't know that there were specific designs for different cars.

my car got stuck in this state for quite sometime. Lots of work is needed considering the rotten chassis, the bed liner and support, and the cabin floor. almost the entire body needed some serious repairs.

Attach file:

---

  381367_10150374284381787_698051786_8575908_1332577682_n.jpg (97.66 KB)

i decided to look for a donor car since it is almost impossible to get new parts and panels locally. I will scavenge anything i can, and plan to re-sell it. Got my 2nd unit and here it is. almost the same price as the other one. cost is around Php50,000 or around AU$ 1200

Attach file:

---

  316283_10150417960719648_257325374647_8268044_1040256787_n.jpg (97.84 KB)


  383965_10150417961484648_257325374647_8268050_598133325_n.jpg (89.22 KB)


  376695_10150417961164648_257325374647_8268047_1538353813_n.jpg (99.16 KB)

Brought it to the shop and re-checked everything.
the unit i just got is way better than the first one. it seems that i will work on this body, and get what i can from the other car.
although i will use the engine and all under chassis/ suspension parts of the 1st vehicle since overhauling and thorough cleaning and powder coating work has started already.
interior is also in fine condition, including the chair upholstery.

i just want to ask if this is the right chair? compared with my other unit this one had a fixed headrest.

Attach file:

---

  377887_10150417960224648_257325374647_8268039_21023785_n.jpg (161.73 KB)


  376885_10150417959529648_257325374647_8268030_2094197337_n.jpg (113.70 KB)


  317094_10150417959729648_257325374647_8268032_161631088_n.jpg (80.34 KB)


  385490_10150417961634648_257325374647_8268052_1578248922_n.jpg (108.48 KB)

sir jomarair - nice find for a parts car ! nice rims pa sir! let me know sir what parts you'll be selling from either units. interested on the ff:
- front bumpers - (of 2nd unit )
- clock
- center console
- interior dome light
- tail light
- rear rubber bumper / dampers
- tail gate lock & hinge
- wiper washer bag
- front grill
- bumper lights

Quote:

Yes, that is correct Seats:
Quote: