yeah, brakes remain stock, found them rotors in germany, brembos 40€ each
i have panelcraft on my radar, their five piece sill repair section seems to be a nice thing too. how costy are they on shipping outside australia?
also desperately seeking for one rear leaf spring mount (the part welded onto the rail) the old one was pretty busted and rough-and-ready welded into shape, don't think my engineer will like it.
is it also possible to stumble upon rear wheel arches? both are simply gone on my car and were modeled out of centimeter-thick-bondo. would kinda suck to weld in just something i find from a different make.
it would be also interesting to know how the sill is shaped on the inside and how it looks like in cross-section - did i mention that theres a quite new skin of thick sheetmetal welded and riveted over the most possibly completely rotten sills on my car?

it would be great if you post here if you ocassionally find some panels offered. there i a lot i can use. i'm looking up ebay and such too but during exams i may miss a lot.

thanks for the wishes