Sumith,

Living in Australia it's easy to take for granted access to good equipment and facilities to work on cars.

certainly a bare bones build up... good work.

Cheers

Ed

Hi Guys

After a long time i started my remain work of my project, This will be going and updated till i finish this here after no more pause periods :)
Removed rusted part of front fender and welded a new part.


thanks
regards
sumith

Attach file:

---

  DSC00045.JPG (117.65 KB)


  DSC00046.JPG (112.76 KB)

Hi Guys

I have celebrated almost anniversary on 4th of car dragging project that may annoy you guys,Managed to finish front tie rod ends ball joint and front shock absorber and fixed them back only break system is left to be fitted looking for a set of good condition disk break pistons to go into the system . and managed to remove rear springs shocks and differential and need to re bushing and paint them and to fix it next week end probably

thanks

regards

sumith

Attach file:

---

  1.jpg (106.98 KB)


  2.jpg (76.47 KB)


  3.jpg (73.97 KB)


  4.jpg (67.18 KB)


  5.jpg (76.32 KB)

That is some major work. Keep going and you will enjoy the end result.

WoooWaaarWeeeeWaaaar that is some rebuild.
Well done with it all. Most of the car is weld wire :)
Keep the pics up mate your going great

Hi Guys

Yesterday was another day with it Painted the rear differential and leaf springs together, i had one broken leaf spring too, does any body what is the cost for leaf spring now a days ? any recent buyer ?

thanks
regards
sumith

Attach file:

---

  Image137.jpg (103.93 KB)


  Image138.jpg (92.48 KB)


  Image143.jpg (104.47 KB)


  Image144.jpg (85.49 KB)


  Image145.jpg (95.46 KB)


  Image146.jpg (93.65 KB)


  Image147.jpg (106.51 KB)


  Image148.jpg (101.21 KB)

poor old girl shes riddled with cancer....nick name "patch"...look like a million bucks when done =)

Hi Guys

Finished the Gear Box with silver and brought a new leaf spring for the broken one,

planning to finish the rest within next 2 months

thanks
regards
sumith

Attach file:

---

  5.jpg (56.45 KB)


  Gear Box.jpg (122.96 KB)

Hi Guys

Since Front Brake Pistons are not in good shape i decided to make them new,I want to Create Front Break cylinders Pistons like this,
i have already got one done by friend of mine this is little more weight than factory level Pistons, will it work without any problem ?

thanks
regards
sumith

Attach file:

---

  Image466.jpg (55.88 KB)


  Image467.jpg (66.53 KB)

Nice work!

The extra weight should not hurt the effectiveness of the brakes.