Called him will do, this is out of my skill level. Thought could do it.

The surface for welsh plug not tapped , the bit where injector nozzle is, the dished area where seal for injector would seat is untouched really

I know its not about looks for ya but that manifold will actually look pretty snazy with the longer ally runners.

Great to see one of the Micks had enough! - :)

It must have been yo gabba gabba with "keep trying don't give up - never give up"

But I know to seek assistance now- before I totally butcher it. Even new 1 peice long runners would be great.

At least I got silicon hose to play with now

You might have to go new piece long runners, if you have a chance there are plenty of alloy bullbars at wreckers that are easily chopped for what you need.
I did it for a quad bike manifold but got someone else to weld it up.

well the car has coped mucho loving this rest period.

new lca bushes doen tonight... what a pita... lucky i had t 3 arm gear puller, used the center to push out the stock bushes, 39 years had enough. there was a 3mm gap between passehnger side bush and xmember, the feral was there but i hope that was the cause of my wobble shake at 90kmh.

also new inner tie rod boots, draglink

just waiting on 1200rc weleded inlet manifold. didnt have a head so will be using silicon hose, just bracing it form underneath to stop potential movemenet.
will work well i hope.

so mainfold and middle exhaust pipe and all done.

also have the rear battery setup to go. found a boat shop sells the paltic battery boxes for $11.... autobarn for same one $60 lol. win win win .

i have steel brackets for battery tie down to bolt to, and box on top. should work fine. cant wait for a drive now.

1200rc.... let me know when its done.

hey unfamilia,

abit off topic,
knowing ur interested in l18 stuff, you could get this for 425aud...
just a thot if ur after efi.its the l18 efi factory injection.

Attach file:

---

  l18 efi.jpg (42.09 KB)


  l18 efi 1.jpg (40.92 KB)

I could have had one for $100 bare but it sold, so yeah it's nice but it's the $425 that's the issue as really not worth that much $200 maybe

its being sold in japan.problem with importing is shipping cost..
how often do this come up for sale anyway? i thought they were 'rare' in oz..

and keep up the efforts on ur car mate!

I saw 1 with computer for $500 no injectors. The bare one for $100 and one other I can't remember price.

Cheers. When's your machine coming out? I'd love to know difference with your mk63 ex fia 4 spots and the spare 4 spott landcruiser calipers I have. I know mine have solid disks

not sure when will be on road mate.

and would be good comparison for calipers mate.i.e weight etc Could bring them next cruise or whenever u wanna come n compare mate.il post up some pics in forum album soon.the fia/nismo calipers have equal size pistons,larger brake surface area,ventilated discs,fit 13inch and periodic.also works choice of calipers on their race n rally cars from 240z,hakosukas gtrs, to sunnys etc so must have been good.also periodic toyota race cars used these calipers... The fia/nismo calipers didn't come from any factory car.they were manufactured specifically for racing by works/nismo.

best comparison will be on track to test things like brake fade etc