User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad



Browsing this Thread:   1 Anonymous Users



(1) 2 »


Mikuni Bike Carbs
Quite a regular
Joined:
2010/1/26 7:06
Group:
Registered Users
Posts: 48
Offline
Has anyone on here used any of the Mikuni bike carbs on a Dato 1200?

The carbs I am looking at are BS34's. These have the rubber diaphragm and round alloy top cover .These carbs are shown in a gallery pic on this site elsewhere and incorrectly labelled flat slide . They are different beasties.
http://datsun1200.com/modules/newbb/v ... mode=0&start=0&menumode=2

Of particular interest is the fuel delivery set up as they are normally gravity fed and don't withstand too much line pressure otherwise they will flood.

Any info or feed back appreciated.
Cheers

Posted on: 2013/9/24 0:51
Transfer the post to other applications Transfer


Re: Mikuni Bike Carbs
Guest_
Clyons8 has. Im planning on using some fz1000 race mikunis on my l18. Just waiting on manifold.

Use a fuel pressure reg or even a motorbike fuel pump for feeding the fuel.

Posted on: 2013/9/24 1:06
Transfer the post to other applications Transfer


Re: Mikuni Bike Carbs
Moderator
Joined:
2001/5/3 7:04
From 48 North
Group:
Registered Users
Contentmaster
Usermaster
Posts: 31575
Offline
Mikuni 34mm round slide carburetors
Open in new window


SUs also have a round slide (piston) along with a traditional butterfly throttle plate.

Posted on: 2013/9/24 2:43
Transfer the post to other applications Transfer


Re: Mikuni Bike Carbs
No life (a.k.a. DattoMaster)
Joined:
2002/11/26 0:38
From Las Vegas USA
Group:
Registered Users
Posts: 2032
Offline
I've been running motorcycle carbs for a few years now. All you need is a fuel pressure regulator to limit it to 1.5 psi. I run a little bit less just on 1 psi. The float needles will seat at upward of 3 psi but it varies from carb to carb, stick to 1.5 and it will be fine.

As for the description flat slides are generally referring to mechanical operation to lift the slide versus a CV carb which uses a diaprhagm to lift the slide both types could have a "flat slide".

The CV type are a bit more,user friendly, a decade ago i ran a Yamaha 1000 powered single seat sports racer and it used CV style downdraft carbs which worked quite well. On my 1200 coupe I run the Keihin FCR flat slide carbs and they also are fantastic, as an motorcycle racer I am biased but I think bike carbs are better made and offer more performance

To,

Posted on: 2013/9/24 5:25
Transfer the post to other applications Transfer


Re: Mikuni Bike Carbs
Just can't stay away
Joined:
2006/4/14 11:11
Group:
Registered Users
Posts: 132
Offline
Rallytwit,

How do the Keihin FCR perform on the road compared to the CV type carbs, including fuel consumption?
I have Keihin CVK41 and FCR36, dunno which to use.

Posted on: 2013/9/24 5:40
Transfer the post to other applications Transfer


Re: Mikuni Bike Carbs
Moderator
Joined:
2001/5/3 7:04
From 48 North
Group:
Registered Users
Contentmaster
Usermaster
Posts: 31575
Offline
Keihin FCR uses a flat slide as the throttle valve, while the Keihen CVK is slide venturi with butterfly-throttle.

41 mm will likely be overcarbed for an A-series engine. 36mm carbs will make plenty of power for 1400-1500cc engines.

Posted on: 2013/9/24 7:33
Transfer the post to other applications Transfer


Re: Mikuni Bike Carbs
No life (a.k.a. DattoMaster)
Joined:
2005/8/27 15:36
From Townsville, Qld
Group:
Registered Users
Posts: 2964
Offline
Awww, I'm not a bum, it just takes me a while to get stuff done.

Posted on: 2013/9/24 8:15
Transfer the post to other applications Transfer


Re: Mikuni Bike Carbs
No life (a.k.a. DattoMaster)
Joined:
2005/8/27 15:36
From Townsville, Qld
Group:
Registered Users
Posts: 2964
Offline
I was going to use the front set as it has the richest needles and smoothest action but I'll just transfer them over to one of the other carbs and build the manifold for that, there's 3 of those with the same spacing so they're probably Kawasaki or Yamaha ones, the black one in the front is off a Suzuki

Posted on: 2013/9/24 8:20
Transfer the post to other applications Transfer


Re: Mikuni Bike Carbs
Quite a regular
Joined:
2010/1/26 7:06
Group:
Registered Users
Posts: 48
Offline
Thanks for the responses everyone. That is useful info.

I have a set of these carbs being the BS34 models which I believe were fitted to a Yamaha XS1100 from the late 70's perhaps early 80's. What I have come to learn about these carbs is that from the factory on some models they set the two centre carbs a bit richer by fitting slightly fatter jets, say 115 on the outers and 120 on the inners. No doubt because they get less air to cool them and so run them a bit richer to try to keep the temperatures under control.This no doubt varied from manufacturer to manufacturer so any set you consider these issues should be kept in mind.

Thats all well and good on an air cooled engine but not a factor on anything that is watercooled. The needle heights are adjustable and have 5 different settings and so should be set the same on the bench before fitting up to the car.

Posted on: 2013/9/25 0:44
Transfer the post to other applications Transfer


Re: Mikuni Bike Carbs
Home away from home
Joined:
2007/5/24 21:24
From Los Angeles,CA
Group:
Registered Users
Posts: 259
Offline
I am running two Mikuni HSR42 carbs. So far they are excellent! The Throttle response is awesome and no flat spots. Super easy to tune. Large float bowls and an accelerator pump. Fit on standard Mikuni, Weber or S.U. manifolds.......

Attach file:



png  Bay26.png (199.85 KB)
8618_5242382d80ed9.png 672X504 px

png  Bay25.png (194.67 KB)
8618_5242384787907.png 610X458 px

png  Bay24.png (199.29 KB)
8618_524238652594e.png 664X498 px

png  Bay28.png (198.16 KB)
8618_52423901452ec.png 643X482 px

png  Carb1.png (198.46 KB)
8618_5242395b3f99e.png 499X666 px

Posted on: 2013/9/25 2:18
Transfer the post to other applications Transfer



(1) 2 »



You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.

[Advanced Search]