Looking to get a single or dual Dellorto manifold for A15.
Will consider other make/kind of intake manifold.

Hi Otilram,

Be weary of manifolds that may be too long. From my understanding some manifolds will interfere with the brake master cylinder.

Option 1

Option 2

Option 3

Option 4

Option 5

Option 6

Thanks!

Still looking.

Twin Dellortoes won't fit on a left-hand drive 1200 unless you move the brake master cylinder.

I would go with a factory Twin Hitachi carburetor setup. If you can find a manifold on ebay, you can buy rebuilt carbs from Z-therapy.

I have a twin SU manifold for sale, 250. It is the GX type with big oval ports that accepts a two stud pattern hitachi SU.

Gem Parts is selling a single Dellorto manifold on eBay right now that fits A15 round port cylinder head. It is listed as A12 SIDEDRAFT WEBER DCOE CARB MANIFOLD.

If you have the 80 HP A15 (oval port), then any A14 oval port manifold will fit. There is a setup on eBay right now under "Nissan Datsun A15, A14 oval port new manifold and Weber 32/36 carburettor set"

under dash brake cyl and booster are possible for clearance and better manifold

Here are the manifolds ddgonzal was talking about. The seller is a member on here.

These are Rowland Brand manifolds.

Manifolds