User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad



Browsing this Thread:   1 Anonymous Users





gearbox
Home away from home
Joined:
2012/10/9 15:38
From WA perth
Group:
Registered Users
Posts: 176
Offline
has anyone fitted a supra 5 speed behind a series motor , how much tunnel work is there ,and fitting it to motor

Posted on: 2020/10/1 2:13
Transfer the post to other applications Transfer


Re: gearbox
No life (a.k.a. DattoMaster)
Joined:
2002/8/11 8:22
From Perth
Group:
Registered Users
Posts: 2680
Offline
T50 celica yes
W50 Celica... pending
Haven't tried the supra box in the tunnel... have one I could have a go and see
You mean a W56 style ?

Posted on: 2020/10/1 11:16
Transfer the post to other applications Transfer


Re: gearbox
No life (a.k.a. DattoMaster)
Joined:
2009/4/30 7:57
From Adelaide
Group:
Registered Users
Posts: 1111
Offline
I've converted a supra style box to fit in my 1200 coupe behind the A series but not yet fitted it to the car. I posted some stuff about it and I don't post much so it won't be hard to find. Essentially I cut a bit off each bell housing and put a 12mm plate in between since the sizes were quite different. I used a mandrel in the main bearings to align it all and refaced the bell housing surfaces on the mill after welding. If I were doing it again I'd probably allow 1.5mm for facing after welding, it's surprising how much distortion you get.

I still have not modified the flywheel or figured out exactly what to buy for the clutch actuation. Planning on using a CSC even though I left enough of the supra bell to use the standard set up. I have to convert the whole clutch actuation to hydraulic. Not sure if I'll finish it this year.

Posted on: 2020/10/1 12:07
_________________
1200 Coupe A15E - ITB
Lamb Daiquiri - a man's cocktail!
Transfer the post to other applications Transfer


Re: gearbox
Home away from home
Joined:
2012/10/9 15:38
From WA perth
Group:
Registered Users
Posts: 176
Offline
I have t50 behind the motor now but i'am getting worried about not handling the hp the motor developing at the time ,I have step it up more with more development in ECU and throttle body work

Posted on: 2020/10/6 12:02
Transfer the post to other applications Transfer






You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.

[Advanced Search]