hey does anyone have any pics of a15 turbos especially exaust manifold pics i am in the middle of building 1 and would like some ideas please

check out "kegs" pics. He is also building an A15T.

Here's an A15 of mine with an A14 forklift manifold that I cut and welded a turbo flange on.

here u go mate, depending if ur insydney or not, ive got a mdf jig that i made up that replicates the shape of the strut tower and firewall of a 1200 so i could get the turbo manifold made. anyone whos in sydney is welcome to use it if they want......

lookin at those pics it looks as if u would never never never clear the strut tower and the enginemount etc if u are ur cutting damn fine lol

thats why imusing a jpipe to bend the pipe back around to a beta position behind the headlight

you would think that fat14's, but i had the turbo on yesterday when the exhaust got made and the exhaust housing clears by more than an inch, theres about 2-3 inches on the engine mount, and the front compressor housing is about 2 inches infrot of the strut tower, so ive got heaps of room to put the piping on without any haggard bends. ill post a few pics in a few weeks when i next put the turbo on, when i do the intercooler piping.