Sorry luv_my_68_wagon_1000, the extractors are too fat to fit between the A12/bellhousing in my 1000 and the steering arm. The passenger foot-well of the 1000 actually seemed like it'd have clearance issues with the exhaust if i could squeeze it between the engine and steering anyhow.

Currently the wheels have 205's on 'em so i am guessing they are around 6 inches, Maybe 5.5". Pretty good nick too, hardly a scratch on them.

dude
about the 1200 extractors in the 1000.
I have the same extractors in 1000 sedan. OK so they didnt fit initially. I borrowed an oxy set from a freind and bent them to fit. I ionly had to move the 4 pipe join about 15mm closer to the gearbox to clear the steering arms. Its a bit brutal but it works. I dont think that it would have affected the extractors much, but I havent noticed.

HEY JACK ,have u still got the wheels

Blast from the past...

These wheels are still at my parents place in Newcastle under some towels. If anybody wants them and can pick them up let me know.

As I recall somebody came to collect them but only brought/offerred well below what was agreed on the phone. That was 2004! Now it is 2011, I'll accept a bottle of Johnnie Walker.

Bump.

Also an A12 from a 120Y at my Nanna's old house... i think.

.