Hy, I'm writing to ask for some advice. I have come across an opportunity to buy a sedan 1200. I like the sedan more than the hatch, perhaps because I had a lot of hatchbacks in my life, is not that one is better than the other, but I just "want" a sedan . Well, the op is here, I will see it next weekend. I was told it is rustr free, no dents, in good shape. Runs and all. I also have a B210, as you know, my B210, as much as I like it, needs rust work, the engine broke( I got excited, the engine lasted a while, but, went kaput).So being the situation, if the 1200 is as clean as mentioned, then, the 1200 would be a better option, no body work needed(except a nice paint job for looks, not necesity), engine running(vrs a broken car)and I can use my B210 parts on it. My B210 has rear koni shocks, rear decambered springs, front sway bar by ADDCO(performance). Also, and I want to confirm this with the 1200 experts, I think that my front end can go bolt on into the 1200, right? The rear springs and shocks will fit too? What about the differential. All in all, what can I salvage from the B210 if I go this route. I like my B210, but , it needs work in the body area, with the 1200 I would eliminate all that, plus the 1200 sedan, lowered is cool. I also have my 13X8 on 215/50/13 tires, from the B210, into the 1200, with fender flares, would work fine.
Need some words of wisdom, I feel bad about getting rid of my B210, but I have not yey won the lottery, and I came across a fork road, I must decide.
later.