u dont need to make a new manifold, just go to exhaust shop and buy a t2 flange, or just give them the manifold and get them, to do it. i think a fj turbo is probly too big i have a t25 on my ute and it is plenty, even on 7psi my car went very well without and intercooler, i reckon a t3 would probly be inefficient on an a series motor.... depends on the mods

dattodude i dont have time to build a manifold its my daily driver and ive only got 3 days to fix it i will play around with other turbos when i got the time thanks for the info i will try get a manifold made up while i use the fj turbo in the mean time.

put a blower on it walkie..
i dare ya...
then we race...

T3 flange is too big for an a-series.

The T25 flange is the go. All CA18/SR20 turbos are T25 flange from the factory.

I just got my turbo off and appart and it seems as if the seals have gone and worn out the bearings because it screams it head off and the front housing is full of oil.

Ive found an fj20 turbo for $350 that should be the same but i would have liked something smaller if possible

hey guys im currently running an rx7 series 3 or 4 turbo on my A14 and im sure it has a T03 flange onto the exhaust manifold. i dont know much about turbos and i want to buy a new turbo as soon as i can but i was just wonderin what other turbos would have a t03 flange that might be suitable for an a14 ie a t25 or a t28 something cheeper and easier to find would be good. what exhaust flange does a t25 and a t28 have?

thanks all