|
|
Browsing this Thread:
1 Anonymous Users
|
|
Re: bluebird rear end into 120y? |
|
Home away from home  
Joined:
2005/1/22 11:45
From Springwood NSW, Formerly Tas.
Group:
Registered Users
|
can you change the axles over to retain the 4 stud?
Posted on: 2006/9/15 13:09
|
|
_________________
1978 120y Coupe.
|
|
|
Re: bluebird rear end into 120y? |
|
No life (a.k.a. DattoMaster)  
Joined:
2004/5/4 8:32
From Canberra
Group:
Registered Users
|
Quote: before you go paying to have a diff shortened run a tape measure over a 720 diff at the mounts
althought these are six stud they are much shorter then bluebird diff and as a bonus they are 4.11:1 or lower in the ratio
they have the big axels the same as the blue bird I just went and measured this for ya, from outside edge of spring mount to outside edge of spring mount is 102cm. From wheel mounting face to wheel mounting face is approx. 145cm (was hard to measure so is only an approximation)
Posted on: 2006/9/15 7:59
|
|
_________________
Recommend trading with: gx5, wardat, dat141, datwags, boofhead, PIGDOG, MYORGZM, sssute, Ronald, beattie, dodgeman, dog160, LAGWAGON, Whitesedan, DamienS, simmos_datto, Team
|
|
|
Re: bluebird rear end into 120y? |
|
Home away from home 
Joined:
2005/4/8 5:37
From Central Vic
Group:
Registered Users
|
before you go paying to have a diff shortened run a tape measure over a 720 diff at the mounts
althought these are six stud they are much shorter then bluebird diff and as a bonus they are 4.11:1 or lower in the ratio
they have the big axels the same as the blue bird
Posted on: 2006/9/15 5:41
|
|
_________________
to buy or not to buy???? OK
This is the reason I have five coupes
|
|
|
Re: bluebird rear end into 120y? |
|
Home away from home Joined:
2005/1/22 11:45
From Springwood NSW, Formerly Tas.
Group:
Registered Users
|
front end will be early 200b. with girlocks :D
i have considerd the rolla diff and already sussed out the wheelnuts. ;) cheers anyway..
Posted on: 2006/9/14 7:14
|
|
_________________
1978 120y Coupe.
|
|
|
Re: bluebird rear end into 120y? |
|
No life (a.k.a. DattoMaster) 
Joined:
2002/8/6 2:24
From Brisbane, Australia
Group:
Registered Users
|
if it was me, I'd use either the 120Y BorgWarner 3.89:1 ratio and the same width as the H150 in the coupes , or a Corolla BorgWarner available in 3.89, 4.1, or 4.3:1 ratios and approx 3" wider, which will match the track on the front after you do a strut swap to Stanza or similar. They are strong enough for a top bhp L series and cheap as chips. And they are a bolt in proposition.
You will need the tailshaft from the donor car too (different flange on the BW), and if you use the Corolla diff, you'll need to swap the flange over from a 120Y BW diff, and get the Toyota wheel nuts too (different thread pitch). Handbrake wil require a bit of fiddling around for the Toyota diff.
Posted on: 2006/9/14 6:40
|
|
_________________
"if you're not on the edge, you're just taking up space"
|
|
|
Re: bluebird rear end into 120y? |
|
Home away from home Joined:
2005/1/22 11:45
From Springwood NSW, Formerly Tas.
Group:
Registered Users
|
schweeto
Posted on: 2006/9/14 5:00
|
|
_________________
1978 120y Coupe.
|
|
|
Re: bluebird rear end into 120y? |
|
No life (a.k.a. DattoMaster) Joined:
2004/5/4 8:32
From Canberra
Group:
Registered Users
|
Quote: got any pics? id be interested to see it nah sorry man its been off the road for a couple of years now, its now at the stage where its running and on the dyno. I'll get pics when he's done
Posted on: 2006/9/14 4:52
|
|
_________________
Recommend trading with: gx5, wardat, dat141, datwags, boofhead, PIGDOG, MYORGZM, sssute, Ronald, beattie, dodgeman, dog160, LAGWAGON, Whitesedan, DamienS, simmos_datto, Team
|
|
|
Re: bluebird rear end into 120y? |
|
Home away from home Joined:
2005/1/22 11:45
From Springwood NSW, Formerly Tas.
Group:
Registered Users
|
got any pics? id be interested to see it
Posted on: 2006/9/14 4:49
|
|
_________________
1978 120y Coupe.
|
|
|
Re: bluebird rear end into 120y? |
|
No life (a.k.a. DattoMaster) Joined:
2004/5/4 8:32
From Canberra
Group:
Registered Users
|
my mate put a s3 bluey diff (h190) in his 120Y coupe, had to move the spring perches. Even with ET pulsar wheels its wide at the back... looks fat though 
Posted on: 2006/9/14 4:40
|
|
_________________
Recommend trading with: gx5, wardat, dat141, datwags, boofhead, PIGDOG, MYORGZM, sssute, Ronald, beattie, dodgeman, dog160, LAGWAGON, Whitesedan, DamienS, simmos_datto, Team
|
|
|
Re: bluebird rear end into 120y? |
|
Home away from home 
Joined:
2005/9/5 14:02
From Bunbury Western Australia
Group:
Registered Users
|
yeah the H190 is a strong diff with some pretty good performance ratios too, speak to Rfastmotorsport about it he runs one in his coupe.
I think they are 2 inches wider which means you either need to use front wheel drive offset rims on the back or fit wheel arch flares, the extra width would give a good strong stance while powering out of corners (just look at Rfastmotorsports avartar!)
Posted on: 2006/9/14 3:02
|
|
_________________
Two things that drive me nuts.....a dry road under a grey sky and a wet road under a blue sky, because no matter what, it's either too soon or too late to drive the way I want
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
Transfer
