Guys, cleaning out all my evil naturally asparated gear. I have no idea how to put up pictures, and it is all being listed on e-bay. Hurry and grab a bargain!!
A14 bottom end. Dismantled, needs hone. 1mm oversize, flycut pistons, o-ringed block, used copper head gasket, shot peened, polished heat treated rods, balanced crank, 6 litre winged sump with windage tray. to suit rebuild. $400.
Twin 40mm delorto's on A14 match ported manifold. Didn't run it on my car, but there isn't any play in the shafts or linkages. Needs new air cleaners. $400.
2 x 56A 4 speed gearboxs. Condition unknown as they came with a couple of motors I bought. $75 each.
13" x 5.5" jelly bean mags with 205/60x13 tyres. 4 of them. 3 are 25-30% tread and 1 is a retread about 85%. 1 has a chunk from sidewall, but they passed rego on the Sunny.Also comes with nuts. $100
H150 diff to suit Sunny. Only done 76000km's. Replaced it with a H165 to suit the turbo. Excellent condition. $75.
E.O.I on the turbo motor I bought off Tyrie. I have rebuilt the turbo and carby and it has a new oil pump, water pump, and a 3" exhaust which ends at the diff, and a new Xtreme heavy duty button clutch.Have dyno sheets with 121 rwhp (90.4rwkw). Runs 12 psi boost. Looking for around $2000.
Ceramic button clutch with hew standard pressure plate. Done about 1000km's, selling due to increase in boost on turbo. $250.
Tailshaft to suit 56A to H150 diff in Sunny. Good condition, only done 76000km's. $50.
Formuling sports steering wheel. Average condition. Has some damage to rim in two spots, and is also a big spline. (Sunny, Stanza, 200B etc). $25
Standard rear springs to suit a Sunny sedan, or Stanza. $20.
I am open to NEAR offers. Selling to fund new engine project.

do you have a link to the ebay site? wouldnt mind those delortos

Can you let us know what location you are in?

hes in new south wales. wouldnt mind a clutch and the winged sump but $$$ do not permit.

Mildman, I am located in Sydney, but we have met at a dingy servo in Vic!!

Sorry Dats5ik, I have NO idea how to link to e-bay. ( but i do know how to load a tape drive for a C-64!)LOL

selling the turbo???
whats the plans, L18 turbo?

hey mate where abouts in sydney
im interested in 1 of the 4 speeds

Tyrie, it has one of those at the bottom!
Shaun, I'm located near Picton.

C'mon boys, buy up big Dog160 needs mucho cash for the next incarnation of "Nana's Sunny". Next motor will be a 'stocker' as manufactured by nissan Don't fret however - it will be old skool and engineered ( )
Cheers