User Login    
 + Register
  • Main navigation
Main Menu
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search

Advanced Search
Google Ad

Browsing this Thread:   1 Anonymous Users



« 1 (2)


#11 Re: Diff Question
one4dato Posted on: 2007/1/29 3:48
whats the standard ute diff length?
Report Top


#12 Re: Diff Question
Posted on: 2007/1/29 4:23
between 1305mm and 1320mm from 3 measurements i have been supplied with.
Report Top


#13 Re: Diff Question
phunkdoktaspok Posted on: 2007/1/29 9:07
Quote:

PIGDOG wrote:

im cutting the long tube down 50mm and the short one down 85mm, swapping axels and getting the long one cut down 135mm and the diff is still going to be about 20mm wider than standard 1200 size


Whats your plans there? what is this going into that requires the centre to be offset so much? If I shortened either axle tube 50mm, i would then shorten the opposite one the exact same amount.
Most shops wouldnt bother taking the tubes out or even bother trying to drill the welds out. There is no need. They would just cut it near the outside end near the bearing carrier. Then shorten the tube. Then sleeve the tube a little. Refit the bearing carrier and weld it all up.
Report Top



« 1 (2)



You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.

[Advanced Search]