can R32 front strut fit in a B310? it got 320mm disc rotor

maybe but i doubt it, fitting a wheel might not happen without having huge flares

r32...320mm disc? brembo calipers?
most of them have a 280 or 296mm disc

what i have found:
http://www.zerotohundred.com/newforum ... embly-rm500nett-only.html

it stated 320mm

how heavy are 280zx/r31 struts compared to stanza/200b struts?

and also what contol arms ball joint radius rods etc to use with 280zx/r31 struts in a 1200?

cheers jake

id say the weight would be the same

mounting is the same also, use stanza stuff
just have to get a sheer load spacer for the steering arm so that the strut locates properly

pigdog your a champion thanks!

is there any hubs can i use to shorten the track width on my stanza struts???
it sticks out past the guards and i don't want to buy new rims..
also the 120y hub won't fit because the stub axle has a larger diameter???

Tappet, Late model 1200 ute or 120y (74 or 76+??) lower arms may do the trick, the stanza/sunny balljoint will bolt to the lower arm which should be the same length as a 1200 one.

You will have heaps of positive camber though, on my partners 1200 with stanza struts + stanza lower arms I have used 13" suzuki fwd rims which are super close to the strut and clear the guard no problems, stanza struts are way too much trouble to fit in a 1200 properly, and the brakes arent even that good.

they may even be 240k struts??
they have already been shortened and has a decent sized disc...
just the wheels stick out too far and i don't want to put in shorter lca"s as i want as much neg camber as i can get.....
surely there is a hub that will fit that brings the offset in???

Well all dato's up to Z31, save the 1200 and early 120y use the same wheel bearing so you'll have to do some research, have fun!